Hardness

Comparing two robot assisted incremental forming methods: incremental forming by pressing and incremental hammering

L. Vihtonen, Arnold Puzik, T. Katajarinne

引用数: 36 • 2008

Isotropic etching polishing of belt ground Inconel 718 to improve surface strengthening and quality

Xiaokang Huang, Ze Chai, Feng Cao, Xukai Ren, Huabin Chen, Hao Wang, Wenfeng Lu, Xiaoqi Chen

引用数: 18 • 2022

An open-atmosphere nitriding process for titanium using a watt-level pulsed Nd:YAG laser

Naofumi Ohtsu, Ryo Endo, Shinya Takeda, Koyo Miura, Kosei Kobayashi

引用数: 11 • 2022

Surface thermohardening by the fast-moving electric arch

Az T Gabdrakhmanov, Л Н Шафигуллин, Э Р Галимов, A. R. Ibragimov

引用数: 8 • 2017

Selective Surface Modification of Complexly Shaped Steel Parts by Robot-Assisted 3D Scanning Laser Hardening System

Dmytro Lesyk, Matej Hruška, Vitaliy Dzhemelinkyi, Oleksandr Dаnylеikо, Milan Honner

引用数: 7 • 2022

Noncontact Sensing of Surface Hardness Using Pulsating Air Jet

Hiroyuki Shinoda, Hiro Yamasaki

引用数: 7 • 1992

Robot-Assisted 3D Laser Surface Hardening of Medium-Carbon Steel: Surface Roughness Parameters and Hardness

Dmytro Lesyk, Matej Hruška, B.N. Mordyuk, Paweł Kochmański, B. Powałka

引用数: 4 • 2023

Planning Strategies for Surface Hardening by Laser Robot

Li Feng Liu, Xi Yang, Haiming Zhang

引用数: 4 • 2011

Investigation with Taguchi method of the effects of the robot-controlled induction hardening parameters on surface hardness of sheet metal moulds

Ensar Yıldırım, Halit Çebi, Murat Şen, Erkan Serdar Yılmaz

引用数: 3 • 2017

LASER SURFACE HARDENING OF CRANKSHAFT

S.M. Shariff, Manish Tak, G. Padmanabham, S. Shanmugam

引用数: 3 • 2009

SELECTIVE SURFACE HARDENING OF GEAR MECHANISM SHAFT BY ROBOTIC LASER 3D SYSTEM

Dmytro Lesyk, Matej Hruška, Karina Sidun, Oleksandr Dаnylеikо, Dmytro Kyforenko, Vitaliy Dzhemelinskyi

引用数: 3 • 2022

Laser Hardening of the Functional Surfaces of Machine Tools

Karel Šramhauser, Sylvia Kuśmierczak

引用数: 3 • 2016

Investigation of the Microhardness, Morphology, and Wear Resistance of A7075 Subjected to Machine Hammer Peening

Yu Liu, Yefu Wang, Yu Lu, Ying Yang, Ning Nie, Xingxing Wang, Yifu Shen

引用数: 2 • 2024

Surface Hardness Improvement of AISI D2 Tool Steel by Laser Transformation Hardening Process Using High-Power Disk Laser

Vitaliy Dzhemelinskyi, Matěj Hruška, B.N. Mordyuk, Daniel Grochała, Dmytro Lesyk

引用数: 2 • 2024

Distortion control in 20MnCr5 bevel gears after liquid nitriding process to maintain precision dimensions

M. Mahendiran, M. Kavitha

引用数: 2 • 2018

Experimental Study on Effect of Laser Hardening Parameters on Carbon Steel, Non-Malleable Cast iron and X20Cr13 Materials

K. Prashanthi, B. Ramakrishna

引用数: 2 • 2018

Effect of Overlap in Robotic Hammer Peening on the Surface Integrity of Alloy Steel 4142

Wai Luen Chan, Kai Hon Low, Henry Kuo Feng Cheng, Roger Chan

引用数: 2 • 2021