Indentation hardness

Advances in Robot Kinematics

Claudio Altafini

Citations: 113 • 2005

Characterization of robotized CMT-WAAM carbon steel

Trayana Tankova, D.G. Andrade, Ricardo Branco, Carlos Zhu, D.M. Rodrigues, Luís Simões da Silva

Citations: 82 • 2022

Properties and anisotropy behaviour of a nickel base alloy material produced by robot-based wire and arc additive manufacturing

Thomas Hassel, Torben Carstensen

Citations: 65 • 2020

Evaluation of microstructure, microhardness, and electrochemical properties of laser-deposited Ti-Co coatings on Ti-6Al-4V Alloy

O.S. Fatoba, Olanrewaju Seun Adesina, A.P.I. Popoola

Citations: 61 • 2018

Microstructure and mechanical properties of Inconel-625 slab component fabricated by wire arc additive manufacturing

G.A. Ravi, N. Murugan, R. Arulmani

Citations: 60 • 2020

Some studies on nickel based Inconel 625 hard overlays on AISI 316L plate by gas metal arc welding based hardfacing process

N. Pravin Kumar, N. Siva Shanmugam

Citations: 54 • 2020

A comprehensive study on surface integrity of nickel-based superalloy Inconel 718 under robotic belt grinding

Junwei Wang, Jijin Xu, Xiangfei Wang, Xiaoqiang Zhang, Xuefeng Song, Xiaoqi Chen

Citations: 50 • 2018

Modern fiber laser beam welding of the newly-designed precipitation-strengthened nickel-base superalloys

Homam Naffakh Moosavy, Mohammad-Reza Aboutalebi, S.H. Seyedein, M. Goodarzi, Meisam Khodabakhshi, Carlo Mapelli, Silvia Barella

Citations: 47 • 2013

Gap tolerance allowance and robotic operational window for friction stir butt welding of AA6061

Priti Wanjara, Bruno Monsarrat, Simon Larose

Citations: 46 • 2012

Post-build thermomechanical processing of wire arc additively manufactured stainless steel for improved mechanical properties and reduction of crystallographic texture

J. W. Elmer, Karl A. Fisher, Gordon R. Gibbs, John Sengthay, D. S. Urabe

Citations: 41 • 2021

Tribological behavior of nanostructured high velocity oxy-fuel (HVOF) thermal sprayed WC-17NiCr coatings

Hamed Asgari, Gobinda C. Saha, Mohsen Mohammadi

Citations: 39 • 2016

Laser metal deposition with spatial variable orientation based on hollow-laser beam with internal powder feeding technology

Tuo Shi, Bingheng Lu, Shihong Shi, Weidong Meng, FU Ge-yan

Citations: 37 • 2016

Optimization of Process Parameters to Improve the Effective Area of Deposition in GMAW-Based Additive Manufacturing and its Mechanical and Microstructural Analysis

Ali Waqas, Xiansheng Qin, Jiangtao Xiong, Hongbo Wang, Chen Zheng

Citations: 36 • 2019

Robotic laser directed energy deposition-based additive manufacturing of tubular components with variable overhang angles: Adaptive trajectory planning and characterization

Farzaneh Kaji, Ali Zardoshtian, Patrick Hallen, German Frikel, Tianyi Tang, Mark Zimny, Ehsan Toyserkani

Citations: 29 • 2022

Cladding with Stellite 6 + WC using a YAG laser robot system

Guojian Xu, Muneharu Kutsuna

Citations: 26 • 2006

The microstructure and cavitation erosion resistance of Ti6Al4V alloy treated by laser gas nitriding with scanning galvanometer

Yu Wang, Yanyi Yin, Guolong Wu, Lin Li, Jianhua Yao, Qunli Zhang

Citations: 26 • 2022

Characterisation of a wire arc additive manufactured 308L stainless steel cylindrical component

Prasanna Nagasai Bellamkonda, S. Malarvizhi, V. Balasubramanian

Citations: 25 • 2022

Microstructural characteristics and tensile properties of ER70S-6 manufactured by Robotic CMT wire-and-arc additive manufacturing

Vishakha Shukla, Vikas Kumar, Ankit Dixit

Citations: 23 • 2023

High-Power Diode Laser Surface Treated HVOF Coating to Combat High Energy Particle Impact Wear

B. S. Mann, Vivek Arya, B. K. Pant

Citations: 22 • 2013

Characteristics of AZ31 Mg alloy joint using automatic TIG welding

Hongtao Liu, Jixue Zhou, Dongqing Zhao, Yunteng Liu, Jianhua Wu, Yuansheng Yang, Baichang Ma, Haihua Zhuang

Citations: 20 • 2017