Gianluca Percoco

关于

暂无简介。

研究焦点

主要成就

代表论文

1. 1
   Additive manufacturing aimed to soft robots fabrication: A review

   171 次引用 · 2020
2. 2
   Additive Manufacturing for Soft Robotics: Design and Fabrication of Airtight, Monolithic Bending PneuNets with Embedded Air Connectors

   59 次引用 · 2020
3. 3
   One-shot additive manufacturing of robotic finger with embedded sensing and actuation

   53 次引用 · 2022
4. 4
   Additive Manufacturing for Sensors: Piezoresistive Strain Gauge with Temperature Compensation

   31 次引用 · 2022
5. 5
   Additive Manufacturing for Bioinspired Structures: Experimental Study to Improve the Multimaterial Adhesion Between Soft and Stiff Materials

   22 次引用 · 2023
6. 6
   I-support soft arm for assistance tasks: a new manufacturing approach based on 3D printing and characterization

   21 次引用 · 2020
7. 7
   Multistack Close Range Photogrammetry for Low Cost Submillimeter Metrology

   15 次引用 · 2013
8. 8
   Inexpensive monolithic additive manufacturing of silicone structures for bio-inspired soft robotic systems

   14 次引用 · 2023
9. 9
   Enhancing 3-D-Printed Piezoresistive Sensors: An Investigation Into Process Parameters, Sensor Geometries and Materials Selection

   12 次引用 · 2025
10. 10
    Electromagnetic assistance enables 3D printing of silicone-based thin-walled bioinspired soft robots

    12 次引用 · 2024

主要合作者