Geert Van Ham

关于

暂无简介。

研究焦点

主要成就

代表论文

1. 1
   Influence of bone milling parameters on the temperature rise, milling forces and surface flatness in view of robot-assisted total knee arthroplasty

   59 次引用 · 2001
2. 2
   Machining and accuracy studies for a tibial knee implant using a force-controlled robot

   36 次引用 · 1998
3. 3
   Machining and Accuracy Studies for a Tibial Knee Implant Using a Force-Controlled Robot

   36 次引用 · 1998
4. 4
   How Correctly Does an Intramedullary Rod Represent the Longitudinal Tibial Axes?

   24 次引用 · 2002
5. 5
   Registration of the tibia in robot-assisted total knee arthroplasty using surface matching

   9 次引用 · 2003
6. 6
   A semi-active milling procedure in view of preparing implantation beds in robot-assisted orthopaedic surgery

   6 次引用 · 2005
7. 7
   Comparison of Registration Procedures of the Tibia in Robot-Assisted Total Knee Arthroplasty

   3 次引用 · 2003
8. 8
   ACCURACY STUDY ON THE REGISTRATION OF THE TIBIA BY MEANS OF AN INTRAMEDULLARY ROD IN ROBOT- ASSISTED TOTAL KNEE ARTHROPLASTY

   2 次引用 · 2000
9. 9
   A force controlled robot as a surgical tool in total knee arthroplasty

   2 次引用 · 1998
10. 10
    Accuracy of the registration of the tibia by means of an intramedullary rod for robot-assisted total knee arthroplasty

    2 次引用 · 1999

主要合作者