Shielding gas

The effect of process parameters on penetration in gas metal arc welding processes

Erdal Karadeniz, Uğur Özsaraç, Ceyhan Yildiz

Citations: 224 • 2005

The Effect of Gas Metal Arc Welding (GMAW) Processes on Different Welding Parameters

Izzatul Aini Ibrahim, Syarul Asraf Mohamat, Amalina Amir, Abdul Ghalib

Citations: 140 • 2012

Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steels

M. Shehryar Khan, Shahriar Imani Shahabad, Mustafa Yavuz, W. W. Duley, E. Biro, Y. Zhou

Citations: 91 • 2021

Quality and productivity improvement in aluminium alloy thin sheet welding using alternating current pulsed metal inert gas welding system

Hongjun Tong, Tomoyuki Ueyama, Shoji Harada, Masao Ushio

Citations: 90 • 2001

Hexavalent chromium content in stainless steel welding fumes is dependent on the welding process and shield gas type

Michael P. Keane, Samuel Stone, Bean Chen, James E. Slaven, Diane Schwegler‐Berry, James M. Antonini

Citations: 51 • 2008

Welding of die-casted magnesium alloys for production

C. Lehner, G. Reinhart, L. Schaller

Citations: 38 • 1999

MIG Welding Guide

Klas Weman, Gunnar Lindén

Citations: 24 • 2006

Mapping the droplet transfer modes for an ER100S-1 GMAW electrode

P. R. Heald, Ruth Madigan, T. A. Siewert, S. Liu

Citations: 23 • 1994

An experimental investigation of the effectiveness of Ar-CO2 shielding gas mixture for the wire arc additive process

Bishal Silwal, Andrzej Nycz, Christopher Masuo, Mark Noakes, David Marsh, Derek Vaughan

Citations: 21 • 2020

Optimization of the A-TIG welding for stainless steels

Maja Jurica, Zoran Kožuh, Ivica Garašić, Mladen Bušić

Citations: 19 • 2018

Spatter And Fume Reduction In Co2 Gas- Shielded Arc Welding By Regulated Globular Transfer

Kei Yamazaki, Reiichi Suzuki, Hiroyuki Shimizu, Fusaki Koshiishi

Citations: 19 • 2012

Examination of microstructure properties of AISI 316L stainless steel fabricated by wire arc additive manufacturing

V. Vinoth, S. Sathiyamurthy, U. Natarajan, D. Venkatkumar, J Prabhakaran, K. Sanjeevi Prakash

Citations: 15 • 2022

Study on the Weldability of Copper—304L Stainless Steel Dissimilar Joint Performed by Robotic Gas Tungsten Arc Welding

Andrei Mitru, Augustin Semenescu, George Simion, Elena Scutelnicu, Ionelia Voiculescu

Citations: 11 • 2022

Heat flow and arc efficiency at high pressures in argon and helium tungsten arcs

Alexandros Katsaounis

Citations: 9 • 1993

Effect of the electrode to work angle, filler diameter and shielding gas type on weld geometry of HQ130 steel joints produced by robotic GMAW

H. R. Ghazvinloo

Citations: 9 • 2010

Online defect detection and penetration estimation system for gas metal arc welding

Mitchell Cullen, Jinchen Ji

Citations: 6 • 2025

A Study on Spatter Tracking Algorithm for a Vertical GMA Welding Process

Tae-Jong Yun, Min-Ho Park, Won-Bin Oh, Bo-Ram Lee, Ill-Soo Kim

Citations: 6 • 2019

Problems of weld overlay of seating surfaces of pipe fitting and solutions

Stanislav S. Poloskov

Citations: 6 • 2020

Effect of shielding gas on microstructure and mechanical properties in AA6061-T6 alloy MIG welding

Eren Yılmaz, Fehim Fındık

Citations: 6 • 2022

Gas tungsten arc process optimization and assessment for robotized position welding of austenitic stainless steel edge joints

Miikka Karhu, Veli Kujanpää

Citations: 4 • 2021