Design of omnidirectional mobile robots with ACROBAT wheel mechanisms

摘要

In this paper, we study the design of omnidirectional mobile robots with Active-Caster RObotic drive with BAll Transmission (ACROBAT). ACROBAT system has been developed by the authors group which realizes mechanical coordination of wheel and steering motions for creating caster behaviors without computer calculations. A motion in the specific direction relative to a robot body is fully depends on the motion of a specific motor. This feature gives a robot designer to build an omnidirectional mobile robot propelled by active-casters with no redundant actuation with a simple control. A controller of the robot becomes as simple as that for omni-wheeled robotic bases. Namely 3DOF of the omnidirectional robot is controlled by three motors using a simple and constant kinematics. ACROBAT includes a unique dual-ball transmission to transmit traction power to rotate and orient a drive wheel with distributing velocity components to wheel and steering axes in an appropriate ratio. Therefore a sensor for measuring a wheel orientation and calculations for velocity distributions are totally removed from a conventional control system. To build an omnidirectional vehicle by ACROBAT, the significant feature is some multiple drive shafts can be driven by a common motor which realizes non-redundant actuation of the robotic platform. A kinematic model of the proposed robot with ACROBAT is analyzed and a mechanical condition for realizing a non-redundant actuation is derived. Based on the kinematic model and the mechanical condition, computer simulations of the mechanism are performed. A prototype two-wheeled robot with two ACROBATs is designed and built to verify the availability of the proposed system. In the experiments, the prototype robot shows successful omnidirectional motions with a simple and constant kinematics based control.