Weldability

Induction Spot Welding of Metal/<scp>CFRPC</scp> Hybrid Joints

Peter Mitschang, Rudi Velthuis, Mirja Didi

引用数: 95 • 2013

A Review of Similar and Dissimilar Micro-joining of Nitinol

T. Kannan, T. Ramesh, P. Sathiya

引用数: 36 • 2016

Modeling of an artificial intelligence system to predict structural integrity in robotic GMAW of UHSS fillet welded joints

Emmanuel Afrane Gyasi, Paul Kah, Huapeng Wu, Martin Appiah Kesse

引用数: 27 • 2017

An Investigation of the weldability of high hardness armour steels

Lenka Kuzmikova

引用数: 14 • 2013

Weldability of Advanced High-Strength Steel Drawn Arc Stud Welding

Cheng-En Hsu, JR Mumaw

引用数: 14 • 2011

A review of pipe cutting, welding, and NDE technologies for use in fusion devices

Yao Ren, Robert Skilton

引用数: 12 • 2024

Expansion of laser–arc hybrid welding to horizontal and vertical-up welding

Takamori Uemura, Koji Gotoh, Issei Uchino

引用数: 12 • 2022

Change in hardness, yield strength and UTS of welded joints produced in St37 grade steel

A.R. Bahman

引用数: 12 • 2010

Reduction of friction stir welding setup loadability, process forces and weld seam width by tool scaling

Michael Grätzel, Michael Hasieber, Torsten Löhn, JP Bergmann

引用数: 11 • 2020

Study on the Weldability of Copper—304L Stainless Steel Dissimilar Joint Performed by Robotic Gas Tungsten Arc Welding

Andrei Mitru, Augustin Semenescu, George Simion, Elena Scutelnicu, Ionelia Voiculescu

引用数: 11 • 2022

Weldability of Additively Manufactured Powder Bed Fusion 316L Stainless Steel Using Arc and Laser Welding

Koen Faes, Rafael Gomes Nunes Silva, Florian Probst, Robin Ceuppens, Wim De Waele

引用数: 8 • 2024

Change in hardness, yield strength and UTS of welded joints produced in St37 grade steel

A. R. Bahman, E. Alialhosseini

引用数: 8 • 2010

Mechanical and Microstructural Characteristics of Conventional and Robotic Gas Metal Arc Welded Low Carbon Steel Joints: A Comparative Study

S. Rajakumar, P. Vimal Kumar, S. Kavitha, V. Balasubramanian

引用数: 8 • 2020

Field Girth Weld HAZ Toughness Improvement: X80/Grade 550

Christopher Penniston, Laurie Collins

引用数: 3 • 2010

Varestraint Weldability Testing of Cast Superalloys

Sukhdeep Singh

引用数: 3 • 2018

Laser and Micro-Plasma Welding of Single Crystal Blades: Advantages of Total Process Control

C. Pilcher, J. Liburdi, C. Berger, M. Iovene

引用数: 3 • 1993

Metallurgical approach for the development of a hot crack-resistant metal-cored wire

Sylvia Holly, Ronald Schnitzer, Gerhard Posch, Jürgen Bruckner, Peter Presoly

引用数: 2 • 2017

Evaluating the effect of strong binding affinity ions on mechanical properties, electrical conductivity, and weldability of conductive alginate-based hydrogels

Van Tron Tran

引用数: 2 • 2025

Experimental studies on formability of Butt-welded magnesium and aluminium alloy sheets by friction stir welding method

Balaji Viswanadhapalli, V.K. Bupesh Raja

引用数: 2 • 2020

Dissimilar Metal Welding of Austenite Stainless Steel and Carbon Steel Using Nd:YAG Laser a Continuous Wave

Ho Jun Shin, Young Tae Yoo, Byung Heon Shin, Ji Hwan Kim

引用数: 2 • 2007