Laser power scaling

Closed loop control of melt pool width in robotized laser powder–directed energy deposition process

Meysam Akbari, Radovan Kovacevic

引用数: 96 • 2019

Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steels

M. Shehryar Khan, Shahriar Imani Shahabad, Mustafa Yavuz, W. W. Duley, E. Biro, Y. Zhou

引用数: 91 • 2021

Evaluation of microstructure, microhardness, and electrochemical properties of laser-deposited Ti-Co coatings on Ti-6Al-4V Alloy

O.S. Fatoba, Olanrewaju Seun Adesina, A.P.I. Popoola

引用数: 61 • 2018

Cutting performances with new industrial continuous wave ND:YAG high power lasers

Christophe Chagnot, G. de Dinechin, G. Canneau

引用数: 43 • 2010

Compact diode-pumped Nd:YAG laser for remote analysis of low-alloy steels by laser-induced breakdown spectroscopy

V. N. Lednev, A. E. Dormidonov, P. A. Sdvizhenskii, M. Ya. Grishin, A. N. Fedorov, A. D. Savvin, E. S. Safronova, С. М. Першин

引用数: 41 • 2017

Laser cutting of composites—Two approaches toward an industrial establishment

R. Staehr, S. Bluemel, Peter Jaeschke, Oliver Suttmann, Ludger Overmeyer

引用数: 41 • 2016

Surface finishing by laser re-melting applied to robotized laser metal deposition

Francesco Bruzzo, Guendalina Catalano, Ali Gökhan Demir, Barbara Previtali

引用数: 34 • 2020

Microstructure and corrosion behavior of high power diode laser deposited Inconel 625 coatings

Jari Tuominen, P. Vuoristo, T. Mäntylä, Jyrki Latokartano, Jorma Vihinen, Peter Andersson

引用数: 33 • 2003

Ex vivo comparison of the tissue effects of six laser wavelengths for potential use in laser supported partial nephrectomy

Wael Khoder, Katja Zilinberg, Raphaela Waidelich, Christian G. Stief, Armin Becker, Thomas Pangratz, Georg Hennig, Ronald Sroka

引用数: 32 • 2012

Femtosecond laser micro-fabricated flexible sensor arrays for simultaneous mechanical and thermal stimuli detection

Ruijie Bai, Yang Gao, Cong Lu, Jianping Tan

引用数: 28 • 2020

Effect of process parameters on defects in large scale components manufactured by direct laser deposition

Dmitriy Masaylo, Sergei Igoshin, Anatoly Popovich, Vera Popovich

引用数: 27 • 2020

Using a Nd:YAG laser and six axes robot to cut zinc-coated steel

K. Abdel Ghany, H. Abdel Rafea, M. Newishy

引用数: 27 • 2005

Effects of Cooling Rate and Silicon Content on Microstructure and Mechanical Properties of Laser Deposited Ti-6Al-4V Alloy

O.S. Fatoba, Esther T. Akinlabi, M.E. Makahtha

引用数: 26 • 2018

Effect of droplet transition on the dynamic behavior of the keyhole during 6061 aluminum alloy laser-MIG hybrid welding

Yue Li, Yanqiu Zhao, Xudong Zhou, Xiaohong Zhan

引用数: 25 • 2021

Process Development for a Robotized Laser Wire Additive Manufacturing

Meysam Akbari, Yaoyu Ding, Radovan Kovacevic

引用数: 24 • 2017

High brightness lasers in cutting applications

Thomas Himmer, Thomas Pinder, Lothar Morgenthal, Eckhard Beyer

引用数: 22 • 2007

Dynamic characterizations of underwater structures using non-contact vibration test based on nanosecond laser ablation in water: investigation of cavitation bubbles by visualizing shockwaves using the Schlieren method

Naoki Hosoya, Itsuro KAJIWARA, Koh Umenai

引用数: 21 • 2015

Cutting by a high power laser at a long distance without an assist gas for dismantling

G. Tahmouch, Patrick Meyrueis, Philippe Grandjean

引用数: 20 • 1997

Robotic laser sensing and laser mirror excitation for pulse-echo scanning inspection of fixed composite structures with non-planar geometries

Hasan Ahmed, Seung-Chan Hong, Jung‐Ryul Lee, Jeong‐Beom Ihn

引用数: 18 • 2021

Development of a Laser Scanning Machining System Supporting On-the-Fly Machining and Laser Power Follow-Up Adjustment

Yisheng Yin, Chengrui Zhang, Tieshuang Zhu, Liangcheng Qu, Geng Chen

引用数: 15 • 2022