“On the Edge” Obstacle Surmounting Method Using Hybrid Locomotion

摘要

Abstract This paper presents on the edge obstacle surmounting method for QuadRunner, a hybrid quadruped robot, to overcome obstacles using hybrid locomotion where both legged and wheel configurations are utilized. When obstacle heights exceed the workspace of its leg, QuadRunner becomes quasi-statically mismatched, meaning the robot’s kinematic constraints are not satisfied, and it fails to achieve the climbing task quasi-statically. By incorporating its body as contact support, the center of gravity (COG) of QuadRunner can be successfully shifted on top of the obstacle to perform surmounting task. The unique design of the QuadRunner leg allows it to behave as a four-bar or slider-crank mechanism depending on the leg’s configuration. Here, we detail the sub-state strategy for its surmount task, where QuadRunner goes through the sub-states {L}EAN, {H}OOK, {F}OUR-BAR, {S}LIDE, {G}ET-UP to climb obstacles. In addition, limitations of the operation are analyzed and the requirements for climbing are identified. With our proposed method, QuadRunner can surmount obstacles of heights between 10 cm and 22 cm (higher than its kinematic max height of 16 cm) within 25 s. Lastly, a reliability test shows that the robot can climb the obstacle with a 70% success rate.