Austenitic stainless steel

Evaluation of wire arc additive manufacturing for large-sized components in naval applications

Antoine Queguineur, Guillaume Rückert, F. Cortial, Jean-Yves Hascoët

Citations: 113 • 2017

Study on laser welding of austenitic stainless steel by varying incident angle of pulsed laser beam

Nikhil Kumar, Manidipto Mukherjee, Asish Bandyopadhyay

Citations: 57 • 2017

Some studies on nickel based Inconel 625 hard overlays on AISI 316L plate by gas metal arc welding based hardfacing process

N. Pravin Kumar, N. Siva Shanmugam

Citations: 54 • 2020

Effects of Minimal Quantity Lubrication (MQL) on Surface Integrity in Robotic Milling of Austenitic Stainless Steel

Lütfi Taner Tunç, Yuchen Gu, M.G. Burke

Citations: 38 • 2016

Characterisation of a wire arc additive manufactured 308L stainless steel cylindrical component

Prasanna Nagasai Bellamkonda, S. Malarvizhi, V. Balasubramanian

Citations: 25 • 2022

Weld parameter prediction using artificial neural network: FN and geometric parameter prediction of austenitic stainless steel welds

Marina Spyer Las Casas, Thales Lucas Diniz de Ávila, Alexandre Queiróz Bracarense, Eduardo José Lima

Citations: 25 • 2018

Numerical modelling and experimental analysis on angular strain induced by bead-on-plate SS316L GMAW using inherent strain and thermomechanical methods

Siti Nursyahirah Ahmad, Yupiter H. P. Manurung, Keval Priapratama Prajadhiana, Yusuf Olanrewaju Busari, Muhd Faiz Mat, Norasiah Muhammad, Martin Leitner, Salina Saidin

Citations: 21 • 2022

Influence of the heat input and aging treatment on microstructure and mechanical properties of AISI 317 L steel weldments using 0020 robotic–pulsed GMAW

Pedro Duarte Antunes, C.C. Silva, Edmilson Otoni Corrêa, Sérgio Souto Maior Tavares

Citations: 19 • 2019

Robotic hammer peening-induced martensite in austenitic steels: Spatial distributions of plastic deformation and phase transformation

Chee Kiang Ivan Tan, Yuefan Wei, Guo Wei Lim, Wei Cheng, Niroj Maharjan

Citations: 18 • 2020

Mitigation of Stress Corrosion Cracking in Nuclear Weldments Using Low Plasticity Burnishing

Jeremy E. Scheel, Douglas J. Hornbach, Paul S. Prevéy

Citations: 13 • 2008

Evaluation of Solidification Cracking Susceptibility in Austenitic Stainless Steel Welds Using Laser Beam Welding Transverse-Varestraint Test

Eun−Joon Chun, Hayato Baba, Kazutoshi Nishimoto, Kazuyoshi Saida

Citations: 12 • 2016

On the Microstructure and Corrosion Behavior of Wire Arc Additively Manufactured AISI 420 Stainless Steel

Mostafa Kazemipour, Jonas Lunde, Salar Salahi, Ali Nasiri

Citations: 11 • 2020

Evaluation of Austenitic Stainless Steel ER308 Coating on H13 Tool Steel by Robotic GMAW Process

Jorge Eduardo Hernández-Flores, Bryan Ramiro Rodríguez-Vargas, Giulia Stornelli, Argelia Fabiola Miranda Pérez, F. Garcı́a-Vázquez, Josué Gómez-Casas, Andrea Di Schino

Citations: 8 • 2023

Remote detection of stress corrosion cracking: Surface composition and crack detection

Cliff J. Lissenden, Igor Jovanovic, Arthur T. Motta, Xuan Xiao, S. Le Berre, David Fobar, Hwanjeong Cho, Sungho Choi

Citations: 7 • 2018

Quenching Heat Treatment Effects on the Mechanical and Microstructure Properties of AISI 304 Type Welded by GMAW Process Using Different Shielding Gases

Rasdi Deraman, M.N. Berhan

Citations: 3 • 2013

Cold Metal Transfer-Based Wire Arc Additively Manufactured Austenitic Stainless Steel/Inconel 625/Superduplex Stainless Steel Wall: Microstructural, Corrosion Properties, and Impact Toughness Evaluation

Siddharth Kumar, Jastej Singh, Harshdeep Kaur, A. S. Shahi

Citations: 2 • 2024

Microstructure evaluation of 304 stainless-steel welds through robotic gmaw process

José Antonio Zamora-Núñez, Ramiro Rodríguez-Rosales, P. García, Bryan Ramiro Rodríguez-Vargas, Ali Tahaei

Citations: 2 • 2023