Infill

Robotic 3D clay printing of prefabricated non-conventional wall components based on a parametric-integrated design

Odysseas Kontovourkis, George Tryfonos

Citations: 109 • 2019

FBG-Embedded 3-D Printed ABS Sensing Pads: The Impact of Infill Density on Sensitivity and Dynamic Range in Force Sensors

Arnaldo Leal‐Junior, Carlos Marques, Moisés R. N. Ribeiro, María José Pontes, Anselmo Frizera

Citations: 85 • 2018

Topology Optimization and Prototype of a Multimaterial-Like Compliant Finger by Varying the Infill Density in 3D Printing

Chih-Hsing Liu, Sy-Yeu Yang

Citations: 34 • 2021

Effect of <scp>3D</scp> printing conditions and <scp>post‐printing</scp> fermentation on pearl millet fortified <i>idli</i>

Vijayakumar Raja, J.A. Moses, C. Anandharamakrishnan

Citations: 30 • 2022

An overview of the latest research on the impact of 3D printing parameters on shape memory polymers

Ahmed A. Ameen, Ayad M. Takhakh, Abdalla Abdal‐hay

Citations: 28 • 2023

Quantification of hyperelastic material parameters for a 3D-Printed thermoplastic elastomer with different infill percentages

Chih-Hsing Liu, Yang Chen, Sy-Yeu Yang

Citations: 26 • 2020

Study on CNT/TPU cube under the 3D printing conditions of infill patterns and density

Imjoo Jung, Eun Joo Shin, Sunhee Lee

Citations: 24 • 2023

Optimal Design of a Highly Self-Adaptive Gripper with Multi-Phalange Compliant Fingers for Grasping Irregularly Shaped Objects

Chih-Hsing Liu, Sy-Yeu Yang, Yi-Chieh Shih

Citations: 19 • 2023

Temperature and Infill Density Effects on Thermal, Mechanical and Shape Memory Properties of Polylactic Acid/Poly(ε-caprolactone) Blends for 4D Printing

Ang Li, Xin‐Gang Chen, Lanying Zhang, Yangfei Zhang

Citations: 18 • 2022

Effect of the infill density on the performance of a 3D-printed compliant finger

Chih-Hsing Liu, Ping-Teng Hung

Citations: 17 • 2022

Improved interlayer performance of short carbon fiber reinforced composites with bio-inspired structured interfaces

Minghui Zhang, Junming Zhang, Dongmin Yang, Yan Li, Xiaoyu Cui, Kunkun Fu

Citations: 16 • 2023

Experimental Investigation of Mechanical Properties of Additively Manufactured Fibre-Reinforced Composite Structures for Robotic Applications

Arnav Bisoi, Mertol Tüfekci, Vehbi Öztekin, Enora Denimal, Loïc Salles

Citations: 13 • 2023

Digital Design and Fabrication Strategy of a Hybrid Timber-Earth Floor Slab

J Trummer, M Schneider, M Lechner, Tilmann Jarmer, Thibault Demoulin, Gnanli Landrou, F Nagler, S Winter, Kathrin Dörfler

Citations: 11 • 2022

A Novel Infill Strategy to Approach Non-Planar 3D-printing in 6-Axis Robotized FDM

Federico Insero, Valentina Furlan, Hermes Giberti

Citations: 7 • 2022

Evaluation of Additive Manufacturing Processes in Fabrication of Personalized Robot

Shushu Wang, Rakshith Badarinath, E. Amine Lehtihet, Vittaldas V. Prabhu

Citations: 7 • 2017

3D Printing with Bamboo: An Early-Stage Exploration towards Its Use in the Built Environment

Jasmine Wong, Serdar Aşut, Stijn Brancart

Citations: 6 • 2024

Topology optimized infill compliant mechanisms for improved output displacements

Osezua Ibhadode, Ken Nsiempba, Zhidong Zhang, Ehsan Toyserkani

Citations: 5 • 2023

4D Printing and Characterization of Shape Memory Polymer (SMP) Based Smart Gripper

Francis Irungu Maina, Nahashon Osinde, Japheth Ka’pesha Odira, Patrick Kariuki Wanjiru, Margaret Wanjiku Mwangi

Citations: 4 • 2020

FEM Simulation as an Element Based on Infill Pattern Structures Fabricated with CFRP-AM

Koki Jimbo, Toshitake TATENO

Citations: 3 • 2021

Multi‐Material <scp>3D</scp> Printing of Soft Dielectric Actuators With Optimized Electrodes

Ivan Raguž, Michael Berer, Clemens Holzer, Bram Vanderborght, Joost Brancart, Sandra Schlögl

Citations: 2 • 2025