Aluminium alloy

Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering

Marina Cabrini, Sergio Lorenzi, Tommaso Pastore, Simone Pellegrini, Diego Manfredi, Paolo Fino, Sara Biamino, Claudio Francesco Badini

Citations: 122 • 2016

Formability of a wire arc deposited aluminium alloy

Carlos M.A. Silva, Ivo M. F. Bragança, Afonso Cabrita, L. Quintino, P.A.F. Martins

Citations: 51 • 2017

Microstructure and fatigue damage mechanism of 6082-T6 aluminium alloy welded joint

Minqi Zhu, Shanglei Yang, Yishan Bai, Cong Fan

Citations: 21 • 2021

Mechanical characterization and comparison of glass fibre and glass fibre reinforced with aluminium alloy (GFRAA) for automotive application

T. Raghav Arvind, D. Roshann Ram Dayal, K.L. Hari Krishna, S. Survesh

Citations: 15 • 2021

Techno-Economic Assessment of Robotic Sorting of Aluminium Scrap

Bart Engelen, Dieter De Marelle, Dillam Jossue Díaz‐Romero, Simon Van den Eynde, Isiah Zaplana, Jef Peeters, Karel Kellens

Citations: 14 • 2022

Comparative study of microstructural and mechanical properties of robotic CMT and GMAW welded 7475-T7351 aluminium alloy joints

Hari Shanker, Reeta Wattal

Citations: 14 • 2023

Formability Enhancement in Incremental Forming for an Automotive Aluminium Alloy Using Laser Assisted Incremental Forming

Amirahmad Mohammadi, Hans Vanhove, Albert Van Bael, Dieter Weise, Joost R. Duflou

Citations: 10 • 2015

Effect of Al ₂ O ₃ film on the mechanical properties of a welded high-strength (AW 7020) aluminium alloy

Muyiwa Olabode, Paul Kah, Esa Hiltunen, Jukka Martikainen

Citations: 9 • 2015

Prediction and prevention of material cracking in the case of micro or milli drawn parts made from aluminium foils

Elena Costache, N. Nanu, Bogdan Chiriță, Gheorghe Brabie

Citations: 8 • 2013

Comparative Study of Microstructural and Mechanical Properties of Robotic Cmt and Gmaw Welded 7475-T7351 Aluminium Alloy Joints

HARI SHANKER, Reeta Wattal

Citations: 7 • 2023

WELDING OF A 7025 AL-ALLOY BY A PULSED MIG WELDING PROCESS

Paul Kah, Muyiwa Olabode, Esa Hiltunen, Jukka Martikainen

Citations: 6 • 2013

Wear and Transmission Error between PEEK Bush and 7075 Aluminium Alloy Cam Plate Components in Robot Joints

Hitonobu Koike, Kenji Kanemasu, Kiyoto Itakura, Kenichi Saruwatari, Justyna Rozwadowska, Megumi Uryu, Edson Costa Santos, Katsuyuki Kida

Citations: 4 • 2013

Comparative Finite Element Analysis of a Novel Robot Chassis Using Structural Steel and Aluminium Alloy Materials

Avadhoot Rajurkar, Kunal Dangra, Aryan Deshpande, Madhav Gosavi, Tejas Phadtare, Gajanan Gambhire

Citations: 3 • 2023

Enhancing deposition quality in robotic WAAM of aluminium alloy: the role of deposition angle

Sumit K. Sharma, Kashif Hasan Kazmi, Parth Patel, C.K. Kaithwas, Prashant Sharma, Mukesh Chandra

Citations: 2 • 2025

Effect of welding mode on selected properties of additively manufactured AA5087 aluminium alloy parts

Martin Sahul, Miroslav Sahul, Barbora Bočáková, Ladislav Kolařík, T Němec, Marie Kolaříková

Citations: 2 • 2024

Robotic welding of thin wall components made of 6xxx and 2xxx series aluminium alloys using low-energy methods

Janusz Rykała

Citations: 2 • 2012

Synergy of the Plastic Treatment HPT and Shot Peening in Aluminium Alloy Al-Mg-Mn-Sc-Zr

М. Стеглински, Paulina Byczkowska, J. Sawicki, Ł. Kaczmarek, Bartłomiej Januszewicz, Marek Klich

Citations: 2 • 2016