Hot-line assembly strategy for connection fittings in 110kV intelligent substation

Abstract

Purpose The purpose of this paper is to provide a safe control strategy for aloft hot-line assembly of connection fittings in 110kV intelligent substations, which is significant to research on hot-line working robots. Design/methodology/approach This paper addresses challenges of the task and establish the contact models of connection fittings. By using this control strategy, neither high precision vision positioning nor preset global reference coordinate system is required. Visual computing only needs to provide an approximately position for the manipulator end-effector, after which the connection fittings assembly task could be completed with the posture of the manipulator adjusted following the guidance by force-position control. The authors also analyze the influence of the intervention of manipulators on the very non-uniform electric field during the operation. Findings This strategy will be particularly useful for the hot-line assembly of connection fittings in 110kV intelligent substations as well as some assembly tasks where uncertain target position and complex contact surface such as cylindrical hole is involved. Practical implications This assembly strategy is tested in energized simulated experimental system. The experiment results show that the robot can replace the manual operation to complete the assembly task safely and efficiently. Originality/value This assembly strategy is able to achieve the assembly task of connection fittings. Unlike other peg-in-hole assembly strategy, it does not require high stability of manipulator or plane contact surface around the hole.