A Lightweight Series Elastic Actuator With Variable Stiffness: Design, Modeling, and Evaluation

Abstract

This article proposes a lightweight variable stiffness actuator (LVSA) driven by a novel mechanism with four sliders on a shared crank (FS2C). The FS2C mechanism allows the LVSA to simultaneously regulate the preload of four springs using only one motor and hence achieves a wider-range continuous stiffness adaption with reduced weight. A cable transmission system is developed to remotely place motors and further reduce the influence of the LVSA on the mass distribution. A dynamics model is established to study the torque-deflection and the stiffness-deflection relations. Based on the model, a torque-stiffness controller is proposed. Experiments are carried out to validate the performance of the dynamics model, the controller, and the LVSA. The results indicate that the LVSA provides a range of stiffness from 0 to 988 Nm/rad with a weight of 0.412 kg, and the controller is accurate in adjusting the output torque and stiffness at relatively high speeds. The proposed actuator provides a solution for actuation systems that have to be lightweight with variable stiffness, such as wearable robotics and assistive exoskeletons.