Experiments on Command Shaping Control of a Manipulator with Flexible Links

Abstract

Minimizingvibrationsof amaneuvered exiblemanipulatorisa challengingtask.Results are presented ofa series of experimental tests carried out on the Space Robot Simulator assembly, which has been set up at the Spacecraft Research and Design Center of the Naval Postgraduate School. The manipulator is planar with two rotational degrees of freedom and two links, of which either one or both can be exible in bending. The manipulator oats on air cushions on a granite table. The task of the experiments was to test the effectiveness of the command input shaping technique on the near-minimum-time tracking control of a exible manipulator. A recently introduced sliding mode control method with smooth joint friction compensation was applied to track either an open- or a closed-reference end-effector path, mapped into joint space. This controller guarantees a very precise tracking of the joint reference motion, despite the high and poorlymodeled joint friction torques. Satisfying results, in terms of vibration reduction, have been obtained on point-to-point trajectories and on closed-path trajectories. The results are compared with those obtained with a different command shaping technique. Marcello Romano is currently a postdoctoral researcher at Dipartimento di Ingegneria Aerospaziale of Politec-nico diMilano.He has been awarded a U.S. NationalResearch Council one-year research associateship, to begin in August 2001 at the Spacecraft Research andDesignCenter of the NavalPostgraduateSchool.He received his Ph.D.