首页 /研究 /On tracking control of cooperative hydraulic manipulators
MANIPULATION

On tracking control of cooperative hydraulic manipulators

Hongwei Zeng, Nariman Sepehri

发表年份
2007
引用次数
8

摘要

Abstract This paper addresses the problem of tracking control of multiple hydraulic manipulators handling a rigid object. We propose a controller that allows two or more hydraulically-actuated robots cooperatively, to move a rigid object along a desired trajectory while sharing the load and maintaining an acceptable internal force on the object. The parasitic effect of friction in the actuators, as well as parametric uncertainties in the manipulators’ dynamics, hydraulic functions and the payload, are compensated through augmentation of the controller by a set of online updating laws. Additionally, an adaptive observer is used along with the controller to avoid the requirement of acceleration feedback, which could be difficult to obtain in practice. Only measurements of joint positions, joint velocities and hydraulic line pressures are required for the implementation of the controller. The tracking error of the control system is proven to converge to zero while the internal force remains bounded. It is further proven that the internal force can be set as close as possible to the desired value through the addition of a simple force feedback loop with an adjustable gain. Both simulation and experimental studies are conducted to clearly illustrate the effectiveness of the developed controller for various tracking tasks. The simulations are carried out using a complete nonlinear model of two multiple-degree-of-freedom industrial hydraulic manipulators handling a rigid object. Experiments are carried out on an available fully-instrumented electro-hydraulic system. Acknowledgements The authors would like to thank the Natural Science and Engineering Research Council (NSERC) of Canada who provided financial support for this research. The authors would also like to thank International Submarine Engineering Ltd. (ISE, Vancouver, BC, Canada, for providing information about the dynamics and kinematics parameters of the MAGNUM-7 hydraulic manipulator used in the simulations presented here.

关键词

Control theory (sociology)Controller (irrigation)Control engineeringTrajectoryHydraulic cylinderEngineeringParametric statisticsNonlinear systemActuatorKinematics

相关论文

查看 MANIPULATION 分类全部论文