A Novel Continuum Robot With Stiffness Variation Capability Using Layer Jamming: Design, Modeling, and Validation

摘要

This paper presents a novel continuum robot ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">OctRobot-I</i> ) that has controllable stiffness variation capability in both the transverse and axial directions. Robot design, stiffness variation analysis and experimental testing are discussed in detail. Stiffness models based on the Euler-Bernoulli beam theory are developed, and then four static deflection cases are analysed. Experiments are conducted with two types of layer jamming sheaths (overlap numbers <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">n</i> = 3, 5) and four different vacuum pressures (0kPa, 25kPa, 50kPa, 75kPa) at three different bending angles (0°, 90°, 180°). The results demonstrate that the stiffness changing tendency is in compliance with the derived models and show that the robot has a good stiffness variable capability. With the jamming sheath of <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">n</i> = 3, the stiffness ranges (ratios) are 36.4 to 241.7 N/m (6.6) and 92.9 to 19.3×10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> N/m (207.8) in the transverse and axial directions, respectively. With the jamming sheath of <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">n</i> = 5, the stiffness ranges (ratios) are 65.7 to 398.3 N/m (6.1) and 106.7 to 20.8×10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> N/m (194.9) in the transverse and axial directions, respectively. Additionally, the actuating and gripping experiments demonstrate that this robot has good performance in real-world applications.