Development of a non-wearable support robot capable of reproducing natural standing-up movements

摘要

To reproduce natural standing-up motion, recent studies have emphasized the importance of coordination between the assisting robot and the human. However, many non-wearable assistive devices have struggled to replicate natural motion trajectories. While wearable devices offer better coordination with the human body, they present challenges in completely isolating mechanical and electrical hazards. To address this, we developed a novel standing-assist robot that integrates features of both wearable and non-wearable systems, aiming to achieve high coordination while maintaining safety. The device employs a four-link mechanism aligned with the human joint structure, designed to reproduce the S-shaped trajectory of the hip and the arc trajectory of the knee during natural standing-up motion. Subject-specific trajectory data were obtained using a gyroscope, and the link lengths were determined to drive the seat along the optimal path. A feedforward speed control using a stepping motor was implemented, and the reproducibility of the trajectory was evaluated based on the geometric constraints of the mechanism. A load-bearing experiment with weights fixed to the seat was conducted to assess the trajectory accuracy under different conditions. Results showed that the reproduction errors for the hip and knee trajectories remained within approximately 4 percent of the seat's total displacement, demonstrating high fidelity to the target paths. In addition, durability testing, thermal safety evaluation, and risk assessment confirmed the reliability and safety of the system for indoor use. These findings suggest that the proposed design offers a promising approach for developing assistive technologies that adapt to individual physical characteristics, with potential applications in elderly care and rehabilitation.