Cycloid gear

Dynamic modelling and contact analysis of bearing-cycloid-pinwheel transmission mechanisms used in joint rotate vector reducers

Li Xin Xu, Bing Chen, Chao Yang Li

Citations: 113 • 2019

Cycloid vs. harmonic drives for use in high ratio, single stage robotic transmissions

Jonathon W. Sensinger, James H. Lipsey

Citations: 87 • 2012

Transmission Performance Analysis of RV Reducers Influenced by Profile Modification and Load

Hui Wang, Zhaoyao Shi, Bo Yu, Hang Xu

Citations: 80 • 2019

Lost motion analysis of one stage cycloid reducer considering tolerances

The Linh Tran, Anh‐Duc Pham, Hyeong-Joon Ahn

Citations: 52 • 2016

A New Tooth Profile Modification Method of Cycloidal Gears in Precision Reducers for Robots

Tianxing Li, Xiaotao An, Xiaozhong Deng, Jinfan Li, Yulong Li

Citations: 50 • 2020

Rotational Transmission Error of K-H-V Planetary Gears With Cycloid Gear. (lst Report.Analytical Method of the Rotational Transmission Error).

Teruaki HIDAKA, Hong-you Wang, Takeshi Ishida, Kazuyuki Matsumoto, Masataka Hashimoto

Citations: 43 • 1994

A manufacturing error measurement methodology for a rotary vector reducer cycloidal gear based on a gear measuring center

Tianxing Li, Junxiang Zhou, Xiaozhong Deng, Jubo Li, Chunrong Xing, Jianxin Su, Huiliang Wang

Citations: 32 • 2018

Hysteresis curve analysis of a cycloid reducer using non-linear spring with a dead zone

Anh‐Duc Pham, The Linh Tran, Hyeong-Joon Ahn

Citations: 28 • 2017

Efficiency Analysis of a Cycloid Reducer Considering Tolerance

Anh‐Duc Pham, Hyeong-Joon Ahn

Citations: 24 • 2017

Rotational Transmission Error of K-H-V-Type Planetary Gears With Cycloid Gears. 2nd Report, Effects of Manufacturing and Assembly Errors on Rotational Transmission Error.

Takeshi Ishida, Hongyou Wang, Teruaki HIDAKA, Masataka Hashimoto

Citations: 22 • 1994

A rack-cutter surface used to generate a spherical gear with discrete ring-involute teeth

Shyue-Cheng Yang

Citations: 21 • 2005

NEW OPTIMIZED TOOTH-PROFILE OF CYCLOIDAL GEAR OF HIGH PRECISION RV REDUCER USED IN ROBOT

Weidong He

Citations: 20 • 2000

Design and dynamic transmission error analysis of a new type of cycloidal-pin reducer with a rotatable output-pin mechanism

Li Xin Xu, Jia Luan Zhong, Yang Li, Le Chang

Citations: 20 • 2022

A design of speed reducer with trapezoidal tooth profile for robot manipulator

Won-Ki Nam, Se-Hoon Oh

Citations: 20 • 2011

Fundamental Analysis of Cycloid Ball Reducer (1st report)

Hidetsugu Terada, Hiroshi Makino, Kenji IMASE

Citations: 19 • 1988

Development of Conical Involute Gears (Beveloids) for Vehicle Transmissions

J. Bo ̈rner, K. Humm, Franz J. Joachim

Citations: 17 • 2003

The Effect of Cycloid Gear Wear on the Transmission Accuracy of the RV Reducer

Yourui Tao, Huishan Liu, Miaojie Wu, Nanxian Zheng, Jiaxing Pei

Citations: 12 • 2024

Structural Characteristics of Rotate Vector Reducer Free Vibration

Chuan Chen, Yuhu Yang

Citations: 11 • 2017

Transmission Efficiency of Cycloid–Pinion System Considering the Assembly Dimensional Chain

Ning Jiang, Shuting Wang, Aodi Yang, Zhou Wan, Jie Zhang

Citations: 11 • 2022

Meshing performance investigations of involute worm and helical gear drive based on counterpart rack

Binbin Lu, Yonghong Chen, Shixuan Li, Bingkui Chen

Citations: 11 • 2021