Carbide

Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing

J. Paulo Davim, Leonardo R. Silva, António Festas, Alexandre Mendes Abrão

Citations: 118 • 2008

Microstructure and mechanical properties of Inconel-625 slab component fabricated by wire arc additive manufacturing

G.A. Ravi, N. Murugan, R. Arulmani

Citations: 60 • 2020

Cladding with Stellite 6 + WC using a YAG laser robot system

Guojian Xu, Muneharu Kutsuna

Citations: 26 • 2006

MXene-based sensors and biosensors: next-generation detection platforms

Ankita Sinha, Dhanjai Dhanjai, Samuel M. Mugo, Jiping Chen

Citations: 26 • 2019

Fabrication and Characterization of Wire Arc Additively Manufactured Ferritic-Austenitic Bimetallic Structure

Uğur Gürol, Batuhan Turgut, Hülya KÜMEK, Savaş Dilibal, M. Koçak

Citations: 23 • 2023

Discontinuously reinforced aluminum MMC extrusions

Don H. Hashiguchi, David Tricker, Andrew Tarrant, Jeffrey Campbell, Charles Pokross

Citations: 23 • 2016

To study the laser cladding of ultra high strength AerMet-100 alloy powder on AISI-4340 steel for repair and refurbishment

Y.N. Aditya, T. Dharish Srichandra, Manish Tak, G. Padmanabham

Citations: 23 • 2020

Layered Titanium Carbide‐Mediated Fast Shape Switching and Excellent Thermal and Electrical Transport in Shape‐Memory‐Polymer Composites for Smart Technologies: MAX Versus MXene

Shubham Jaiswal, Jeet Vishwakarma, Shubham Bhatt, Saheb Karak, Pankaj Bharti, Chetna Dhand, Rajeev Kumar, Pradip Kumar, Mohammad S. M. Saifullah, Surajit Saha, Rahul Mishra, Neeraj Dwivedi

Citations: 18 • 2023

Corrosion and Metallurgical Behavior of Wire Arc Additively Manufactured Functionally Graded Superduplex Stainless Steel/Inconel 625

Harshdeep Kaur, Siddharth Kumar, Dikshant Malhotra, Tarun Nanda

Citations: 14 • 2023

Complex analysis of elaboration of steel–TiC composites by direct metal deposition

M. Doubenskaia, I. Smurov, Sergey N. Grigoriev, M. Pavlov

Citations: 12 • 2013

A Survey of Current Robot Metrology Methods

K. Lau, R.J. Hocken

Citations: 10 • 1984

Effect of the Binder during Ultra-Precision Polishing of Tungsten Carbide Using a Semirigid Bonnet Tool

Xiaolong Ke, Wei Wu, Kangsen Li, Yongheng Yu, Tianyi Wang, Bo Zhong, Zhenzhong Wang, Jiang Guo, Chunjin Wang

Citations: 8 • 2022

Migration Behavior of Tungsten Carbide in the Dissimilar Joints of WC-TiC-Ni/304 Stainless Steel Using Robotic MIG Welding

Guotao Ying, Hongying Gong, Peiquan Xu

Citations: 7 • 2018

Improved wear resistance of cemented carbide impact needle under high frequency micro-amplitude impact treated by high current pulsed electron beam

Shuiqing Liu, Jinyuan Fu, Xiao Shen, Biao Chen, Xu Han

Citations: 6 • 2023

Cladding of Stellite-6 and vanadium carbide on carbon steel using a yttrium–aluminum–garnet laser robot system

Guojian Xu, Muneharu Kutsuna, Manoj Rathod

Citations: 6 • 2006

Robot based deposition of WC-Co HVOF coatings on HSS cutting tools as a substitution for solid cemented carbide cutting tools

Wolfgang Tillmann, C. Schaak, Dirk Biermann, Robert Aßmuth, Sebastian Goeke

Citations: 5 • 2017

Development of an Optimized Converter Layer for a Silicon-Carbide-Based Neutron Sensor for the Detection of Fissionable Materials

Stephen Monk, S. P. Platt, Michael J. Anderson, David Cheneler, Mustafa Alhamdi

Citations: 5 • 2019

Influence of Cr3C2-NiCr Feedstock Powder Characteristics on Deposition Efficiency, Coating Microstructure, and Abrasion Wear Resistance

L.‐M. Berger, S. Thiele, T. Börner, Leo Janka, Manel Rodríguez Ripoll

Citations: 4 • 2014

Advanced composite alloys for constructional parts of robots

D. K. Issin, Zh. D. Zholdubayeva, Yelena Neshina, А. D. Аlkina, Nurbol Khuangan, G. M. Rahimova

Citations: 4 • 2018

Study of the Structure and Properties of EP718 Alloy Welded Joints Produced by Robotic GMA Welding

Roman Valentinovich Nikiforov, V.R. Galimov, A. E. Medvedev, A. Medvedev

Citations: 3 • 2024