How Fast Can a Robotic Drummer Beat Using Dielectric Elastomer Actuators?

Abstract

Fast drumming presents a speed challenge to many robotic arms. To simultaneously meet the needs for speed, stroke, and force, we proposed and tested a new double-saddle dielectric elastomer actuator (DEA) as the artificial biceps for driving a lightweight robotic drummer. This work finds that fast force induction is instrumental to the fast drumming by a DEA-supported drumstick. While a pure-shear series of DEA under a large pre-stretch and lateral reinforcement can generate a large isotonic stroke, it is not fast in isometric force induction. Instead, this work found a double-saddle DEA, which is a degenerated two-segment pure-shear DEA with a middle laterally buckled beam, managed to induce a faster isometric force at a 0.5s down time constant when its ultimate actuation tapered due to substantial strain stiffening effect. As such, this double-saddle DEA-driven drummer suffered less from the dynamic stroke decrement than the 8-segment DEA did. A 4.4-gram DEA managed to swing freely a 7.8-gram drumstick up to nearly 60 degrees at 6 kV and a maximum tip speed of up to 0.45 m/s. The drumming frequency upon 5.5 kV activation was up to 2-2.5 Hz. In comparison, an 8-segment pure-shear DEA-driven drummer failed to reach the drum when pulsed at 2 Hz. Interestingly, a slower stroke excited multiple drumbeats due to secondary bounces. To achieve a faster drumming to match a human drummer, it is foreseen that a harder dielectric elastomer material will help drive a faster soft robot.