A Vertical Look at UAV Connectivity in the Wild: Cellular vs. Starlink, 3D Characterization, and Performance Prediction
Sravan Reddy Chintareddy, Sherwan Jalal Abdullah, Justin D. Clough, Victor S. Frost, Shawn Keshmiri, Morteza Hashemi
2026
Abstract
In this paper, we present an open-source measurement platform designed to characterize the performance of commercial cellular (Verizon, a major US provider) and LEO satellite (Starlink) networks through real-world flight tests in rural environments. We implement a comprehensive multi-layer measurement approach spanning physical layer signal metrics, multi-cell network topology, and end-to-end (E2E) application performance. Through an extensive flight campaign with more than $10$ flight tests, $4.5$+ hours of flight time resulting in more than $18$K samples, we present the first detailed, open-source dataset analyzing dual cellular and Starlink performance for low-altitude UAV operations. Our cellular-Starlink comparative results, which are collected \emph{simultaneously at the same time and location}, demonstrate significant performance differences between the two technologies: the LEO satellite link achieves superior latency performance with $95\%$ of Round-Trip Time (RTT) measurements below $50$ ms compared to $80\%$ under $150$ ms for cellular, and exceptional downlink capacity with $95\%$ exceeding $25$ Mbps versus only $5$ Mbps for cellular. Our analysis on cellular network performance demonstrates that while higher altitudes (e.g., $330+$ m above the sea level) improve signal power by $15-20$ dB via line-of-sight (LOS) propagation, it causes a $3-4$ $\times$ increase in handover rates, which is due to excessive multi-cell visibility rather than signal degradation. Furthermore, we observe asymmetric impacts on the RTT performance due to handovers such that $53.5$\% of handovers improve RTT, but worst-case degradation ($275$ ms) is $2$ $\times$ larger than best-case improvement ($137$ ms).
Keywords
Related papers
A dual-loop framework for manufacturability-aware topology optimization of electric vehicle structures via wire arc additive manufacturing
Qiang Cui, Chuan Yu, Daoqian Yang +2 more
Robotics and Computer-Integrated Manufacturing · 2026
Geometric digital twin: A digital and intelligent model for aero-engine assembly accuracy prediction
Ke Shang, Xin Jin, Teli Xu +4 more
Robotics and Computer-Integrated Manufacturing · 2026
Hierarchical decision-making for UAVs’ game via LLM enhanced multi-agent reinforcement learning
Xinyu Dong, Bo Li, Guangyu Zhang +2 more
Aerospace Science and Technology · 2026
Revolutionizing Industries Through AI-Driven Robotics
Aryan Chaudhary
Recent Advances in Computer Science and Communications · 2026