Formability

Current and Future Uses of Aluminum in the Automotive Industry

Russell Long, Eric Boettcher, Dan Crawford

引用数: 97 • 2017

Formability of a wire arc deposited aluminium alloy

Carlos M.A. Silva, Ivo M. F. Bragança, Afonso Cabrita, L. Quintino, P.A.F. Martins

引用数: 51 • 2017

Low Temperature Warm Forming of Magnesium ZEK 100 Sheets for Automotive Applications

Xiao Ping Niu, Tim Skszek, Mark Fabischek, Alex Zak

引用数: 24 • 2014

Robot-assisted incremental sheet metal forming under the different forming condition

Swagatika Mohanty, Srinivasa Prakash Regalla, Y. V. D. Rao

引用数: 23 • 2019

Effect of MIG welding process parameters on microstructure and tensile behavior of hastelloy C276 using response surface methodology

Raja Subramanian, Balasubramanian Kaliyaperumal

引用数: 22 • 2019

Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures

Christopher A. Battaglia, Martin F. Miller, Saša Živković

引用数: 18 • 2018

On forces, formability and geometrical error in metal incremental sheet forming

Antonio Fiorentino, Aldo Attanasio, Roberto Marzi, Elisabetta Ceretti, Claudio Giardini

引用数: 16 • 2011

Robot assisted incremental sheet forming of Al6061 under static pressure: Preliminary study of thickness distribution within the deformation region

Ravi Prakash Singh, Sandeep Gupta, Pankaj Kumar Singh, Santosh Kumar

引用数: 15 • 2021

Skins and Sleeves for Soft Robotics: Inspiration from Nature and Architecture

Constantina Lekakou, Yahya Elsayed, Tao Geng, Chakravarthini M. Saaj

引用数: 14 • 2015

Robot-based incremental sheet forming – the tool path planning

Alexandru Bârsan, Mihai-Octavian Popp, Gabriela-Petruța Rusu, Iosif-Adrian Maroșan

引用数: 13 • 2021

Process capabilities and future scope of Incremental Sheet Forming (ISF)

Radhe Shyam Bhasker, Yogesh Kumar

引用数: 13 • 2022

Robot-Assisted Cold and Warm Incremental Sheet Forming of Aluminum Alloy 6061: A Comparative Study

Ravi Prakash Singh, Santosh Kumar, Sarang Pande, Sachin Salunkhe, Adham E. Ragab, Pankaj Kumar Singh, Md. Meraz, J. Paulo Davim

引用数: 13 • 2023

Incremental deformation: A literature review

Daniel Nasulea, Gheorghe Oancea

引用数: 13 • 2017

Development of a Robot‐Based Sheet Metal Forming Process

Horst Meier, O. Dewald, Jian Zhang

引用数: 13 • 2005

Evaluation of the dimensional accuracy through 3D optical scanning in incremental sheet forming

Alexandru Bârsan, Sever‐Gabriel Racz, Radu-Eugen Breaz, Mihai Crenganiș

引用数: 10 • 2023

A novel pellet-based 3D printing of high stretchable elastomer

Jianxun Zhang, Shengyang Luo

引用数: 10 • 2024

Formability Enhancement in Incremental Forming for an Automotive Aluminium Alloy Using Laser Assisted Incremental Forming

Amirahmad Mohammadi, Hans Vanhove, Albert Van Bael, Dieter Weise, Joost R. Duflou

引用数: 10 • 2015

Effect of inclination and rotation of the sheet on sheet thinning and formability in robot assisted incremental sheet metal forming

Swagatika Mohanty, Srinivasa Prakash Regalla, Y. V. D. Rao

引用数: 8 • 2021

Advancements in robot-assisted incremental sheet hydroforming: a comparative analysis of formability, mechanical properties, and surface finish for rhomboidal and conical frustums

Ravi Prakash Singh, Santosh Kumar, Pankaj Kumar Singh, Md. Meraz, Sachin Salunkhe

引用数: 8 • 2024

Laser Heat Treatment Effects on Roller Hemming in Aluminum Alloys

Tobias Kleeh, Marion Merklein, Karl Roll

引用数: 8 • 2012