Electrical discharge machining

Experimental investigation of effects of cutting parameters on surface roughness in the WEDM process

Mustafa İlhan Gökler, Alp Mithat Ozanözgü

引用数: 98 • 2000

The machining characteristics and surface integrity of Ni-rich NiTi shape memory alloy using wire electric discharge machining

Himanshu Bisaria, Pragya Shandilya

引用数: 55 • 2018

Wire-EDM machinability investigation on quaternary Ni₄₄Ti₅₀Cu₄Zr₂ shape memory alloy

C. Balasubramaniyan, K. Rajkumar, S. Santosh

引用数: 47 • 2021

Multi-Response Optimization of Al2O3 Nanopowder-Mixed Wire Electrical Discharge Machining Process Parameters of Nitinol Shape Memory Alloy

Rakesh Chaudhari, Parth Prajapati, Sakshum Khanna, Jay Vora, Vivek Patel, Danil Yurievich Pimenov, Khaled Giasin

引用数: 40 • 2022

A Study of Added SiC Powder in Kerosene for the Blind Square Hole Machining of CFRP Using Electrical Discharge Machining

PV Arul Kumar, J. Vivek, N. Senniangiri, S. Nagarajan, K. Chandrasekaran

引用数: 30 • 2021

Deviations in Geometry of Miniature Gears Fabricated by Wire Electrical Discharge Machining

Kapil Gupta, Neelesh Kumar Jain

引用数: 29 • 2013

WEDM of Al/SiC/Ti composite: A hybrid approach of RSM-ARAS-TLBO algorithm

Rajesh Khanna, Neeraj Sharma, Nilesh Kumar, Rahul Dev Gupta, Abhishek Sharma

引用数: 28 • 2022

Parametric Optimization and Influence of Near-Dry WEDM Variables on Nitinol Shape Memory Alloy

Rakesh Chaudhari, Aniket Kevalramani, Jay Vora, Sakshum Khanna, Vivek Patel, Danil Yurievich Pimenov, Khaled Giasin

引用数: 28 • 2022

Study of the contact force in free-form-surfaces compliant EDM polishing by robot

Jun Zhan, Ji Zhao, S. Xu, Ping Zhu

引用数: 25 • 2002

Servo Control Strategies for Vibration-Control in Robotic Wire EDM Machining

Sergio Almeida, John P.T. Mo, Cees Bil, Songlin Ding, Xiangzhi Wang

引用数: 16 • 2021

Study on Effect of Machining Parameters on Performance Characteristics of Ni-rich NiTi Shape Memory Alloy during Wire Electric Discharge Machining

Himanshu Bisaria, Pragya Shandilya

引用数: 16 • 2018

Nano electrical discharge machining – the outlook, challenges, and opportunities

Deepak Kumar, Vivek Bajpai, Nirmal Kumar Singh

引用数: 15 • 2021

Conceptual Design of a High-Speed Wire EDM Robotic End-Effector Based on a Systematic Review Followed by TRIZ

Sergio Almeida, John P.T. Mo, Cees Bil, Songlin Ding, Xiangzhi Wang

引用数: 15 • 2021

Review on WEDM of Shape Memory Alloy

Rahul Kedare, Vaibhav Nanavare, Sumit Sharma, Anil Midathada, Uday K. Ravella

引用数: 14 • 2018

EDM machining of Ti6Al4V alloy using colloidal biosilica

G. Mehershilpa, D. Prasad, Chappeli Sai Kiran, Amir Shaikh, S. Socrates

引用数: 13 • 2023

Experimental investigation and optimisation of process parameters in micro-electrical discharge machining

J. Jerald, S. Kumanan, S.P. Leo Kumar, Himanshu Chandrakar

引用数: 9 • 2013

Linear Electric Motors in Machining Processes

Jacek F. Gieras

引用数: 9 • 2013

Fabrication of micro ball joint by using micro-EDM and electroforming

Chang-Sheng Lin, Yunn‐Shiuan Liao, Yi-Ting Cheng, Yunn-Cheng Lai

引用数: 8 • 2009

Contribution à l'accroissement des performances du processus de µEDM par l'utilisation d'un robot à dynamique élevée et de haute précision

Cédric Joseph

引用数: 8 • 2005

Investigations on Wire Electro Discharge Machining (WEDM) characteristics of NiTi Shape Memory Alloy

Vinayak N. Kulkarni, V.N. Gaitonde, K S Nalavade, Mahesh Patil

引用数: 7 • 2019