Robot path planning for metrology in hybrid manufacturing

摘要

The objective of the wire arc additive manufacturing (WAAM) hybrid cell is to significantly reduce lead time associated with large scale parts. The WAAM process utilizes a 6 degree-of-freedom (DOF) robot manipulator in addition to a 2 DOF part positioner. After printing, the part is translated into position for scanning to inform the subtractive manufacturing process. Scanning in a manual setting can be a long and arduous process to generate scans of sufficient quality for the basis of informed machining. Effective path planning for scanning with the intent to reduce scanning time, increase quality of scans, and move toward a full automation of the hybrid manufacturing cell is investigated in this paper. Simulation software is used to create and verify path plans prior to importing and implementing on a 6 DOF robotic manipulator to which a GOM ATOS Q 3D scanner is mounted. The quality, amount of time necessary to produce, and number of scans required to produce a sufficient representation for machining are compared using three methods. The first method is a manual scanning configuration, the second is using a generalized path plan, and the third is using a geometry-based path plan.