Electric arc

The acquisition and processing of real-time information for height tracking of robotic GTAW process by arc sensor

Yanling Xu, Jiyong Zhong, Mingyan Ding, Huabin Chen, Shanben Chen

Citations: 66 • 2012

Process stability control of corner structures in robotic gas tungsten arc additive manufacturing via arc sensing

Yongsheng Yu, Jun Xiong, Yong Chen, Huihui Zhao

Citations: 26 • 2023

Controlling GT arc length from arc light emissions

R. W. Richardson, F.S. Edwards

Citations: 13 • 1996

Separation of Metal from Metal-Plated Plastic by Pulsed Power

Hidenori Akiyama, T. Nagashima, Takao Namihira, Yoshihide Kato, N. Shimomura, S. Katsuki, Takao Hisazumi

Citations: 11 • 2005

Heat flow and arc efficiency at high pressures in argon and helium tungsten arcs

Alexandros Katsaounis

Citations: 9 • 1993

Layer width control in robotic pulsed gas tungsten arc additive manufacturing through composite sensing of vision and arc

Jun Xiong, Yongsheng Yu, Guangjun Zhang, Senmu Zheng

Citations: 6 • 2023

Impact of feed rate and arc power in wire arc additive manufacturing of AISI 308L stainless steel

Mojtaba Karamimoghadam, Mohammad Rezayat, Nicola Contuzzi, Vito Denora, A. Mateo, Giuseppe Casalino

Citations: 5 • 2025

Using Unsupervised Learning for Regulating Deposition Speed During Robotic Wire Arc Additive Manufacturing

Ashish Kulkarni, Prahar M. Bhatt, Alec Kanyuck, Satyandra K. Gupta

Citations: 4 • 2021

Analysis of Arc discharge during the entry and exit of an equi-potential state by a live-line maintenance robot for 500 kv overhead transmission lines

Shaotong Pei, Haichao Sun, Bing Xiao, He Zhu, Weiqi Wang, Min Wu, Lan Bo

Citations: 3 • 2025

Properties of coatings obtained by electric arc spraing for renovation of parts of machines and vehicle mechanisms

A. Lopata, M. Holovashchuk, L. Lopata, E. Solovuch, S. Katerinich

Citations: 2 • 2022

Experimental study on arc discharge of detection robot in UHV line

Jian Liang, Shuangyi Guo, Yunhan Mu, Haipeng Wang, Kechao Tian, Siwan Shu

Citations: 2 • 2024

Stabilization and Control of Arc in TIG Welding by Laser Irradiation (Development of Laser Weaving Process in Arc Welding I)

Yuichiro MURATA, Kôichi Yokoyama, T.H. Kim, Yasuo Suga

Citations: 2 • 2011

Selection of Trajectories to Improve Thermal Fields During the Electric Arc Welding Process Using Hybrid Model CFD-FNN

Sixtos Antonio Arreola-Villa, Alma Rosa Méndez‐Gordillo, Alejandro Pérez-Alvarado, Rumualdo Servín-Castañeda, Ismael Calderon‐Ramos, Héctor Javier Vergara–Hernández

Citations: 1 • 2025

Microstructural and Mechanical Characterization of Wire Arc Additive Manufactured Stainless Steel 316L

Qasim Murtaza, Pushpendra Singh

Citations: 1 • 2025