Alloy

Fundamentals of modern manufacturing : materials, processes, and systems

Mikell P. Groover

Citations: 1365 • 1996

Soft Multifunctional Composites and Emulsions with Liquid Metals

Navid Kazem, Tess Hellebrekers, Carmel Majidi

Citations: 397 • 2017

Shape Memory Alloy (SMA) Actuators: The Role of Material, Form, and Scaling Effects

Min‐Soo Kim, Jae‐Kyung Heo, Hugo Rodrigue, Hyun‐Taek Lee, Salvador Pané, Min‐Woo Han, Sung‐Hoon Ahn

Citations: 305 • 2023

Shaping a Soft Future: Patterning Liquid Metals

Jinwoo Ma, Febby Krisnadi, Man Hou Vong, Minsik Kong, Omar Awartani, Michael D. Dickey

Citations: 285 • 2022

Variable stiffness actuator for soft robotics using dielectric elastomer and low-melting-point alloy

Jun Shintake, Bryan Schubert, Samuel Rosset, Herbert Shea, Dario Floreano

Citations: 230 • 2015

Variable stiffness material based on rigid low-melting-point-alloy microstructures embedded in soft poly(dimethylsiloxane) (PDMS)

Bryan Schubert, Dario Floreano

Citations: 219 • 2013

Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys

Beytullah Gungor, Erdinç Kaluç, Emel Taban, Aydın Şik

Citations: 154 • 2013

Wire arc additive manufacturing of high-strength low alloy steels: study of process parameters and their influence on the bead geometry and mechanical characteristics

Ahmet Yıldız, Kemal Davut, Barış Koç, Oğuzhan Yılmaz

Citations: 153 • 2020

Mechanically Stretchable and Electrically Insulating Thermal Elastomer Composite by Liquid Alloy Droplet Embedment

Seung Hee Jeong, Si Chen, Jinxing Huo, E. Kristofer Gamstedt, Johan Liu, Shi-Li Zhang, Bin Zhang, Klas Hjort, Zhigang Wu

Citations: 152 • 2015

Investigations on the influence of composition in the development of Ni–Ti shape memory alloy using laser based additive manufacturing

S. Shiva, I. A. Palani, Sanjay Mishra, C. P. Paul, L. M. Kukreja

Citations: 147 • 2014

Chemical ordering in Ni-Mn-Ga Heusler alloys

R.W. Overholser, Manfred Wuttig, D. A. Neumann

Citations: 145 • 1999

High-Fidelity Conformal Printing of 3D Liquid Alloy Circuits for Soft Electronics

Shuo Zhang, Bei Wang, Jiajun Jiang, Kang Wu, Chuan Fei Guo, Zhigang Wu

Citations: 143 • 2019

Microstructure and porosity characteristics of 5A06 aluminum alloy joints using laser-MIG hybrid welding

Xiaohong Zhan, Yanqiu Zhao, Zemin Liu, Qiyu Gao, Hengchang Bu

Citations: 125 • 2018

Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering

Marina Cabrini, Sergio Lorenzi, Tommaso Pastore, Simone Pellegrini, Diego Manfredi, Paolo Fino, Sara Biamino, Claudio Francesco Badini

Citations: 122 • 2016

Development, Processing and Applications Range of Magnesium Lithium Alloys

H. Haferkamp, M. Niemeyer, Rudolf Boehm, U. Holzkamp, Christian Jaschik, V. Kaese

Citations: 112 • 2000

Alloy Development, Processing and Applications in Magnesium Lithium Alloys

H. Haferkamp, Rudolf Boehm, U. Holzkamp, Christian Jaschik, V. Kaese, Matthias Niemeyer

Citations: 110 • 2001

Giant magnetostrictive alloy (GMA) applications to micro mobile robot as a micro actuator without power supply cables

Toshio Fukuda, Hidemi HOSOKAI, Hideaki Ohyama, H Hashimoto, Fumihito Arai

Citations: 109 • 2002

Influence of Interpass Temperature on Wire Arc Additive Manufacturing (WAAM) of Aluminium Alloy Components

Karan S. Derekar, J. Lawrence, Geoff Melton, Adrian Addison, Xiang Zhang, Lei Xu

Citations: 99 • 2019

Shock Absorption Capacity of Restorative Materials for Dental Implant Prostheses: An In Vitro Study

María Menini, Enrico Conserva, Tiziano Tealdo, Marco Giorgio Bevilacqua, Francesco Pera, Alessio Signori, Paolo Pera

Citations: 96 • 2013

Current mode effects on weld bead geometry and heat affected zone in pulsed wire arc additive manufacturing of Ti-6-4 and Inconel 718

Michalis Benakis, D. Costanzo, A. Patran

Citations: 88 • 2020