A Large-Deflection FBG Bending Sensor for SMA Bending Modules for Steerable Surgical Robots

Abstract

This paper presents the development of a fiber Bragg grating (FBG) bending sensor for shape memory alloy (SMA) bending modules. Due to the small form factor, low cost, and large-deflection capability, SMA bending modules can be used to construct disposable surgical robots for a variety of minimally invasive procedures. To realize a closed-loop control of SMA bending modules, an intrinsic bending sensor is imperative. Due to the lack of bending sensors for SMA bending modules, we have developed an FBG bending sensor by integrating FBG fibers with a superelastic substrate using flexible adhesive. Since the substrate is ultra-thin and adhesive is flexible, the sensor has low stiffness and can measure large curvatures. Additionally, due to the orthogonal arrangement of the sensor/actuator assembly, the influence of temperature variation caused by SMA actuation can be compensated. The working principle of the developed sensor was modeled followed by simulations. After experimentally evaluating the developed model, the sensor was integrated with an SMA bending module and cyclically bi-directionally deflected. The experimental results proved the relatively high measurement accuracy, high repeatability, and large measurable curvatures of the sensor, although hysteresis was observed due to friction.