Surface integrity
相关论文数: 20
顶级研究者
最高引用论文
A method of modeling residual stresses in superfinish hard turning
Susheel K. Mittal, C.R. Liu
引用数: 78 • 1998
The machining characteristics and surface integrity of Ni-rich NiTi shape memory alloy using wire electric discharge machining
Himanshu Bisaria, Pragya Shandilya
引用数: 55 • 2018
Research on robotic belt grinding method of blisk for obtaining high surface integrity features with variable inclination angle force control
Guijian Xiao, Xuetao Liu, Kangkang Song, Tangming Zhang, Yun Huang
引用数: 51 • 2023
A comprehensive study on surface integrity of nickel-based superalloy Inconel 718 under robotic belt grinding
Junwei Wang, Jijin Xu, Xiangfei Wang, Xiaoqiang Zhang, Xuefeng Song, Xiaoqi Chen
引用数: 50 • 2018
Wire-EDM machinability investigation on quaternary Ni<sub>44</sub>Ti<sub>50</sub>Cu<sub>4</sub>Zr<sub>2</sub> shape memory alloy
C. Balasubramaniyan, K. Rajkumar, S. Santosh
引用数: 47 • 2021
Multi-Response Optimization of Al2O3 Nanopowder-Mixed Wire Electrical Discharge Machining Process Parameters of Nitinol Shape Memory Alloy
Rakesh Chaudhari, Parth Prajapati, Sakshum Khanna, Jay Vora, Vivek Patel, Danil Yurievich Pimenov, Khaled Giasin
引用数: 40 • 2022
Effects of Minimal Quantity Lubrication (MQL) on Surface Integrity in Robotic Milling of Austenitic Stainless Steel
Lütfi Taner Tunç, Yuchen Gu, M.G. Burke
引用数: 38 • 2016
An Investigation of Surface Corrosion Behavior of Inconel 718 after Robotic Belt Grinding
Junwei Wang, Jijin Xu, Xiaoqiang Zhang, Xukai Ren, Xuefeng Song, Xiaoqi Chen
引用数: 25 • 2018
Effects of Robotic Hammer Peening on Structural Properties of Ni-Based Single-Crystal Superalloy: Dislocation Slip Traces and Crystallographic Reorientations
Chee Kiang Ivan Tan, Wei Cheng, Guo Wei Lim, Dennis Cheng Cheh Tan, Coryl Lee, Jayce Jian Wei Cheng, Henry Kuo Feng Cheng, Louiz C. Lee
引用数: 23 • 2020
Study on modelling simulation and distribution characteristics of residual stress during robotic weld end grinding of high strength modulated steel
Jimin Ge, Zhaohui Deng, Dahu Cao, Zhongyang Li, Lishu Lv, Wei Liu, Jaxue Nie
引用数: 21 • 2023
Material Removal and Surface Integrity Analysis of Ti6Al4V Alloy after Polishing by Flexible Tools with Different Rigidity
Xiaolong Ke, Wei Wu, Chunjin Wang, Yongheng Yu, Bo Zhong, Zhenzhong Wang, Tianyi Wang, Jianji Fu, Jiang Guo
引用数: 20 • 2022
Surface integrity improvement of the ground surface of Inconel 718 fabricated by forging and additive manufacturing using a robotic rotational burnishing method
Bowen Qi, Ze Chai, Xiaokang Huang, Wenxing Guo, Xukai Ren, Huabin Chen, Xiaoqi Chen
引用数: 18 • 2024
A novel comprehensive framework for surface roughness prediction of integrated robotic belt grinding and burnishing of Inconel 718
Bowen Qi, Xiaokang Huang, Wenxing Guo, Xukai Ren, Huabin Chen, Xiaoqi Chen
引用数: 15 • 2024
Development of surface residual stress and surface state of 42CrMo4 in multistage grinding
Florian Borchers, Heiner Meyer, Carsten Heinzel, Daniel Meyer, Jérémy Épp
引用数: 14 • 2020
Pocket milling of composite fibre-reinforced polymer using industrial robot
Ever Grisol de Melo, Tiago Borsoi Klein, Sascha Reinkober, Jefferson de Oliveira Gomes, Eckart Uhlmann
引用数: 11 • 2019
Surface Integrity of AISI 52100 Bearing Steel after Robot-Based Machine Hammer Peening
Robby Mannens, Lars Uhlmann, Felix Lambers, Andreas Feuerhack, Thomas Bergs
引用数: 11 • 2020
Uses of abrasives and abrasive tools
Ian M. Hutchings
引用数: 10 • 1993
Study of Workpiece Temperature Distribution in the Contact Zone during Robotic Grinding Process Using Finite Element Analysis
Amir Masoud Tahvilian, Henri Champliaud, Zhaoheng Liu, Bruce Hazel
引用数: 7 • 2013
Videooptical Surface Shape and Integrity Estimation in Robots Machining
Tadeusz Mikołajczyk
引用数: 6 • 2013
Experimental Study of Machining of Shape Memory Alloys Using Dry Micro Electrical Discharge Machining Process
Sagil James, Sharadkumar Kakadiya
引用数: 6 • 2018