Anodized Aluminum Foil Winding Axial Flux Machine for Direct-Drive Robotic Applications

摘要

There is a need for higher specific torque electric actuators in novel direct-drive robotic applications. Since the specific torque is inherently limited by material properties, designers have to look at novel materials to push the specific torque limit further. In this article, anodized aluminum foil is considered as an alternative to enameled copper wire in a yokeless and segmented armature axial flux machine. This machine topology has a high specific torque and is particularly suited for an anodized aluminum foil winding. The dc resistance, thermal properties, and eventually the specific torque of a prototype test case machine are compared for both winding materials. A 3-D thermal finite element model is used to analyze the influence of the thermal interface between winding body and housing and the influence of the cooling performance on the specific torque. To conclude, anodized aluminum foil winding offers a higher specific torque in direct-drive yokeless and segmented armature axial flux actuators where the winding body thermal resistance is dominant in the thermal path from heat source to heat sink. It is experimentally shown that for the prototype machine, the torque per kg active stator mass increases 13% through the use of anodized aluminum foil.