Modeling and Force Analysis of a Harvesting Robot for Button Mushrooms

摘要

With the improvement of the quality of life, the demands on button mushroom (Agaricus Bisporus) increase significantly. But traditional farming methods mainly rely on costly human picking, which is currently facing the time-consuming and labor-intensive problem. As machine vision technology becomes more mature, harvesting robot with flexible picking end-effector is an alternative method to address this issue. Though the conventional harvesting robot is capable of mushrooms picking, but the damage rate is relatively high for the improper picking force and motion. Thus, a novel picking end-effector for button mushrooms is designed based on vacuum negative pressure picking in this paper. The harvesting robot with flexible end-effector is proposed to solve the problem: 1) to avoid the injury when the end-effector touch the mushroom; 2) to increase the picking efficiency without damage rate increase. The structure of robotic mushroom picking end-effector is described in detail, and then the kinematic modeling and picking force analysis of this robot are presented. Lastly, the numerical simulation via the MATLAB is carried out to study the influence of the robot parameters. The bruise tests indicated that the maximal allowable stress is 0.196 MPa and mean allowable pressure is 13.82 N. Preliminary results demonstrate that the robot achieved 88.2% success rate and 2.9% damage rate in the factory environment, and there is potential for the automatic mushroom harvesting with the proposed harvesting robot.