Let's compare
R-2000iC/270U
FANUC
Not yet assessed
- Height
- —
- Payload
- —
- Verified autonomy
- not assessed
- Real deployment
- not assessed
- Status
- —
- Price
- —
R-2000iC/270U
FANUCThe FANUC R-2000iC/270U is a 6-axis heavy-payload industrial robot arm from FANUC's most commercially successful robot series. The '270U' designation indicates a 270 kg payload capacity in an upside-down (inverted/rack-mount) configuration, with a reach of approximately 2655–3095 mm and ±0.05 mm repeatability, controlled by the R-30iB Plus controller. It is a pre-programmed, task-executing industrial robot used autonomously for spot welding, material handling, assembly, and similar applications — no human performs or drives the task during operation. Several extracted facts pertain to the broader FANUC product ecosystem, general research papers, or other R-2000iC variants rather than the 270U specifically, so some fields carry reduced confidence.
Availability
Specification
- payload capacity
- 270 kg
- reach
- Approximately 2655–3095 mm (model-dependent; 270U likely ~2655 mm or 3095 mm depending on sub-variant)
- joint ranges (270F variant, likely same for 270U)
- J1 ±370°, J2 ±136°, J3 ±312°, J4 ±720°, J5 ±250°, J6 ±720°
- joint speeds (270F variant)
- J1 105°/s, J2 90°/s, J3 85°/s, J4 120°/s, J5 120°/s, J6 200°/s
Price
No public price — contact the supplier for a quote.
Good · Bad · Ugly
Evidence-graded claims from the FANUC deep report
FANUC industrial robots (welding, palletizing, painting, assembly, machine tending) operate fully autonomously once programmed — no human performs or drives the task during operation.
Independent community practitioners on Reddit (r/PLC, r/robotics) confirm FANUC robots run their assigned tasks independently in live production environments, consistent with the autonomy verdict (confidence 0.93); no evidence of remote human task-driving was found [16][19][20].
from FANUC deep report →FANUC's hardware is well-built, reliable, accurate, and very long-lived in real-world industrial deployments.
Independent community sources on Reddit (r/PLC) corroborate hardware reliability and longevity claims, explicitly contrasting strong hardware quality against software shortcomings [16][17][19].
from FANUC deep report →
FANUC is showcasing Physical AI and AI-enabled robotics, including a collaboration with Google AI for agent-powered robot operation, representing a meaningful leap in adaptive autonomy.
Evidence is limited to FANUC America's own press releases from Automate 2026 — no independent third-party testing, customer deployment data, or external validation of the AI capability claims has been identified [11][14].
from FANUC deep report →FANUC America announced a $90 million investment to construct an 840,000 sq ft robot manufacturing facility in the US (announced March 2026).
The investment announcement is confirmed by a PR Newswire press release and LinkedIn corroboration, but these are distribution channels for the company's own announcement — no independent journalist investigation, regulatory filing, or construction verification has been identified; the facility is not yet built [10][12].
from FANUC deep report →
FANUC robots achieve high positional accuracy in real-world deployments, consistent with advertised specifications.
Independent practitioner reports on Reddit (r/Fanuc, r/PLC) document ~0.3 mm positional error in real-world mid-range positions and express skepticism about trusting advertised performance data, indicating a gap between spec-sheet claims and field reality [18][19].
from FANUC deep report →
About the company
Editorial directory of real robot products from leading global manufacturers. Each entry links to the manufacturer's official page.
