Rapid Prototyping Process Using Metal Directly

Abstract

Rapid Prototyping emerged in the USA in the late 80's and it made the whole industry rethink
\ntheir way of making prototypes. Several new different process have emerged since then and these
\nvary in materials, times, prices, fInishing quality, etc. However, not many have achieved acceptable
\nresults with using 100% pure metal. Some heavy industry want prototypes made with metal in order
\nto assess not only the shape of the prototype but also its hardness conditions and functionality of the
\ncomponent in real situations. This technique is still under development at several different places and
\nalthough some research have been done recently the results are not yet as desired.
\nIn the last couple of years a Rapid Prototyping process involving direct deposition of metal had
\nbeen under development (as a PhD research) at Cranfield University. The process entails the use of a
\nGas Metal Arc fusion welding robot which deposits successive layers of metal in such way that it
\nforms a 3D solid component.
\nA solid model is frrst drawn using a CAD system, then data indicating the kind of layers and
\ndimension is incorporated and the solid is automatically sliced. This slicing routine also generates
\nreports on the welding time and conditions for the production of the component and automatically
\ngenerates the robot program.
\nDepending on the complexity of the component, the time from drawing the component to being
\nready to press the robot start button to make the component can take less than a couple of hours.
\nSeveral test components were produced with good characteristics and perfectly acceptable
\nsurface finishing. This paper describes the process and shows some samples.