Tungsten

Metal oxide nanostructures for sensor applications

Daniela Nunes, Ana Pimentel, A. Gonçalves, Sónia Pereira, Rita Branquinho, Pedro Barquinha, Elvira Fortunato, R Martins

引用数: 343 • 2019

Oxide‐Mediated Formation of Chemically Stable Tungsten–Liquid Metal Mixtures for Enhanced Thermal Interfaces

Wilson Kong, Zhongyong Wang, Meng Wang, Kenneth C. Manning, Aastha Uppal, Matthew Green, Robert Y. Wang, Konrad Rykaczewski

引用数: 186 • 2019

Computational modelling of shaped metal deposition

Andrés Anca, Vı́ctor D. Fachinotti, Gustavo A. Escobar-Palafox, Alberto Cardona

引用数: 86 • 2010

Ultrasonic phased array inspection of a Wire + Arc Additive Manufactured (WAAM) sample with intentionally embedded defects

Yashar Javadi, Charles MacLeod, Gareth Pierce, Anthony Gachagan, David Lines, Carmelo Mineo, Jialuo Ding, Stewart Williams, Momchil Vasilev, Ehsan Mohseni, Riliang Su

引用数: 78 • 2019

In situ multi-elemental analysis by laser induced breakdown spectroscopy in additive manufacturing

V. N. Lednev, P. A. Sdvizhenskii, R. D. Asyutin, R. S. Tretyakov, M. Ya. Grishin, A. Ya. Stavertiy, С. М. Першин

引用数: 61 • 2018

Finite-element modelling of heat transfer in shaped metal deposition and experimental validation

Vı́ctor D. Fachinotti, Alberto Cardona, Bernd Baufeld, Omer Van der Biest

引用数: 61 • 2012

Deposition height detection and feature point extraction in robotic GTA-based additive manufacturing using passive vision sensing

Jun Xiong, Yupeng Pi, Hui Chen

引用数: 48 • 2019

In situ elemental analysis and failures detection during additive manufacturing process utilizing laser induced breakdown spectroscopy

V. N. Lednev, P. A. Sdvizhenskii, R. D. Asyutin, R. S. Tretyakov, M. Ya. Grishin, A. Ya. Stavertiy, A. N. Fedorov, С. М. Першин

引用数: 43 • 2019

Continuous monitoring of an intentionally-manufactured crack using an automated welding and in-process inspection system

Yashar Javadi, Ehsan Mohseni, Charles MacLeod, David Lines, Momchil Vasilev, Carmelo Mineo, Euan Foster, Gareth Pierce, Anthony Gachagan

引用数: 39 • 2020

Performance assessment of CMT over GTA welding on stacked thin sheets of CRNGO electrical steel

Bhushan Y. Dharmik, Nitin Kumar Lautre

引用数: 23 • 2020

Characteristics of AZ31 Mg alloy joint using automatic TIG welding

Hongtao Liu, Jixue Zhou, Dongqing Zhao, Yunteng Liu, Jianhua Wu, Yuansheng Yang, Baichang Ma, Haihua Zhuang

引用数: 20 • 2017

Optimization of the A-TIG welding for stainless steels

Maja Jurica, Zoran Kožuh, Ivica Garašić, Mladen Bušić

引用数: 19 • 2018

Arc welding Control for Shaped Metal Deposition Process

Filippo Bonaccorso, Luciano Cantelli, Giovanni Muscato

引用数: 16 • 2011

Optimization and influence of process parameters of dissimilar SS304L – SS430 joints produced by Robotic TIG welding

M. Venkata Ramana, Bikash Kumar, M. Krishna, M. Venkateshwar Rao, Vinod Kumar

引用数: 13 • 2019

Laser induced breakdown spectroscopy for in-situ multielemental analysis during additive manufacturing process

V. N. Lednev, R. S. Tretyakov, P. A. Sdvizhenskii, M. Ya. Grishin, R. D. Asyutin, С. М. Першин

引用数: 12 • 2018

Development and control of shaped metal deposition process using tungsten inert gas arc heat source in additive layered manufacturing

Adnan A. Ugla, Oğuzhan Yılmaz, Ahmed R. J. Almusawi

引用数: 12 • 2016

Intentional weld defect process: From manufacturing by robotic welding machine to inspection using TFM phased array

Yashar Javadi, Momchil Vasilev, Charles MacLeod, Gareth Pierce, Riliang Su, Carmelo Mineo, Jerzy Dziewierz, Anthony Gachagan

引用数: 12 • 2019

Study on the Weldability of Copper—304L Stainless Steel Dissimilar Joint Performed by Robotic Gas Tungsten Arc Welding

Andrei Mitru, Augustin Semenescu, George Simion, Elena Scutelnicu, Ionelia Voiculescu

引用数: 11 • 2022

Controlling torch height and deposition height in robotic wire and arc additive manufacturing on uneven substrate

Menghan Shi, Jun Xiong

引用数: 9 • 2023

Heat flow and arc efficiency at high pressures in argon and helium tungsten arcs

Alexandros Katsaounis

引用数: 9 • 1993