Strain hardening exponent

Mimicking biological stress–strain behaviour with synthetic elastomers

Mohammad Vatankhah‐Varnosfaderani, William F. M. Daniel, Matthew H. Everhart, Ashish Pandya, Heyi Liang, Krzysztof Matyjaszewski, Andrey V. Dobrynin, Sergei S. Sheiko

引用数: 406 • 2017

3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties

Kequan Yu, Wes McGee, Tsz Yan Ng, He Zhu, Victor C. Li

引用数: 211 • 2021

Formability of a wire arc deposited aluminium alloy

Carlos M.A. Silva, Ivo M. F. Bragança, Afonso Cabrita, L. Quintino, P.A.F. Martins

引用数: 51 • 2017

Strain stiffening and positive piezoconductive effect of liquid metal/elastomer soft composites

Jin Zhang, Min Liu, Garth Pearce, Yuyan Yu, Sha Zhao, Yang Zhou, Anthony Chun Yin Yuen, Congyuan Tao, Cyrille Boyer, Feng Huang, Mohammad S. Islam, Chunhui Wang

引用数: 36 • 2020

Programmable and Thermally Hardening Composite Yarn Actuators with a Wide Range of Operating Temperature

Ziheng Zhang, Bo Zhu, Zehua Peng, Rong Yin, Ray H. Baughman, Xiaoming Tao

引用数: 27 • 2020

Surface roughness evaluation in hardened materials by pattern recognition using network theory

Matej Babič, Michele Calì, Іван Назаренко, Cristiano Fragassa, Sabahudin Ekinović, Mária Miháliková, Mileta Janjić, I. Belič

引用数: 24 • 2018

Numerical modelling and experimental analysis on angular strain induced by bead-on-plate SS316L GMAW using inherent strain and thermomechanical methods

Siti Nursyahirah Ahmad, Yupiter H. P. Manurung, Keval Priapratama Prajadhiana, Yusuf Olanrewaju Busari, Muhd Faiz Mat, Norasiah Muhammad, Martin Leitner, Salina Saidin

引用数: 21 • 2022

Effects of Post-Weld Heat Treatment on the Microstructure and Mechanical Properties of Automatic Laser-Arc Hybrid Welded AZ31B Magnesium Alloys

Jin Xiong, Ruochao Wang, Dongqing Zhao, Hongtao Liu, Jixue Zhou

引用数: 10 • 2024

Strengthening of Welded Joints of Load-Bearing Structures of Robotic Systems with Ball-Rod Hardening

Alexey N. Beskopylny, Besarion Meskhi, Nikita Beskopylny, Irina Chukarina, Alexandr Isaev, Andrey Veremeenko

引用数: 9 • 2021

The Influence of the Strain-Hardening Model in the Axial Force Prediction of Single Point Incremental Forming

Rogelio Pérez‐Santiago, Nicolas J. Hendrichs, Gustavo Capilla-González, Elisa Vázquez, Enrique Cuan‐Urquizo

引用数: 6 • 2024

Bio-inspired bouligand architectures for enhanced flexural performance in 3D-printed strain-hardening cementitious composites (3DP-SHCC)

Shiping Li, Yan Sun, Qian Ye, Wujun Chen, Daxu Zhang, Xiaoniu Yu

引用数: 5 • 2025

Relevant material characterization for load prediction in incremental forming

A Abdelkefi, Dominique Guines, Lionel Leotoing, Sandrine Thuillier

引用数: 4 • 2022

Effect of Twisted and Coiled Polymer Actuator (TCPA) on Crack Dispersion Properties of HPFRCC

Takatsune Kikuta, Tomoya Nishiwaki

引用数: 2 • 2022