Dynamic turning of 13 cm robot comparing tail and differential drive

摘要

Rapid and consistent turning of running legged robots on surfaces with moderate friction is challenging due to leg slip and uncertain dynamics. A tail is proposed as a method to effect turns at higher yaw frequencies than can be obtained by differential velocity drive of alternate sides. Here we introduce a 100 mm scale dynamic robot - OctoRoACH - with differential-drive steering and a low-mass tail to investigate issues of yaw rate control. The robot without tail is underactuated with only 2 drive motors and mass of 35 grams including battery and control electronics. For some surface conditions, OctoRoACH can maintain heading or turning rate using only leg velocity control, and a basic rate-gyro-based heading control system can respond to disturbances, with a closed-loop bandwidth of approximately 1 Hz. Using a modified off-the-shelf servo for the tail drive, the robot responds to turning commands at 4 Hz and up to 400°/sec.