Shot peening
相关论文数: 20
顶级研究者
最高引用论文
Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering
Marina Cabrini, Sergio Lorenzi, Tommaso Pastore, Simone Pellegrini, Diego Manfredi, Paolo Fino, Sara Biamino, Claudio Francesco Badini
引用数: 122 • 2016
Mechanism of surface modification using machine hammer peening technology
Friedrich Bleicher, Christoph Lechner, Christoph Habersohn, Ernst Kozeschnik, Beatrix Adjassoho, Heinz Kaminski
引用数: 88 • 2012
Fatigue Assessment and Lefm Analysis of Cruciform Joints Fabricated with Different Welding Processes
Zuheir Barsoum, Bertil Jönsson
引用数: 44 • 2008
Evaluation of Residual Stresses Induced by Robotized Hammer Peening by the Contour Method
Lyès Hacini, Ngan Van Lê, P. Bocher
引用数: 44 • 2008
Mechanical Properties Enhancement of Additive Manufactured Ti-6Al-4V by Machine Hammer Peening
Leonor Neto, Stewart Williams, Jialuo Ding, Jan Hönnige, Filomeno Martina
引用数: 40 • 2019
Development of a portable laser peening device and its effect on the fatigue properties of HT780 butt-welded joints
Yuji Sano, Tomoharu Kato, Yoshio Mizuta, Satoshi Tamaki, Koki Yokofujita, Takunori Taira, Tomonao Hosokai, Yoshihiro Sakino
引用数: 20 • 2022
Effects of Laser Peening with a Pulse Energy of 1.7 mJ on the Residual Stress and Fatigue Properties of A7075 Aluminum Alloy
Yuji Sano, Kiyotaka MASAKI, Yoshio Mizuta, Satoshi Tamaki, Tomonao Hosokai, Takunori Taira
引用数: 14 • 2021
Grinding- and robotic hammer peening-induced modifications in the near-surface regions of laser-cladded Inconel 718 coatings
Tzee Luai Meng, T.F. Wang, Ming Lin, Yee Ng, Xian Yi Tan, Siew Lang Teo, Chee Kiang Ivan Tan, R. Lim
引用数: 12 • 2024
Surface Integrity of AISI 52100 Bearing Steel after Robot-Based Machine Hammer Peening
Robby Mannens, Lars Uhlmann, Felix Lambers, Andreas Feuerhack, Thomas Bergs
引用数: 11 • 2020
Residual Stresses Induced by Robotized Hammer-Peening
Denis Thibault, R. Simoneau, Jacques Lanteigne, J. L. Fihey
引用数: 7 • 2005
Simulation and automation of aluminum panel shot peen forming
Vladislav Sushitskii, Pierre-Olivier Dubois, Hong Miao, Martin Lévesque, Frédérick P. Gosselin
引用数: 6 • 2024
Research on the Influence of HMFI and PWHT Treatments on the Properties and Stress States of MAG-Welded S690QL Steel Joints
Jacek Górka, Mateusz Przybyła
引用数: 6 • 2024
Energy-Dependent Surface Integrity of Stainless Steel AISI 304 After Robot-Based Machine Hammer Peening
Robby Mannens, Lars Uhlmann, Andreas Feuerhack, Thomas Bergs
引用数: 6 • 2021
Residual Stresses Induced by Robotized Hammer-Peening
Denis Thibault, R. Simoneau, Jacques Lanteigne, J. L. Fihey
引用数: 6 • 2005
Measurement and functional approximation of impact pressure distribution in shot peening
Takahiro Ohta
引用数: 5 • 2017
Investigation of the Microhardness, Morphology, and Wear Resistance of A7075 Subjected to Machine Hammer Peening
Yu Liu, Yefu Wang, Yu Lu, Ying Yang, Ning Nie, Xingxing Wang, Yifu Shen
引用数: 2 • 2024
ROBOTIC ARM HUMAN-MACHINE INTERFACE FOR LASER SHOCK PEENING APPLICATIONS
Marek Böhm, Jan Kaufman, Jan Brajer, Danijela Rostohar
引用数: 2 • 2019
Development Trend and Application of Peening Technology to Improve Welding Joint Life
Jae-Sung Kim, Byeong-Choon Goo, Seong-Hyun Song, In-Sik Cho
引用数: 2 • 2021
Experimental implementation of the laser shock peening method aimed at an increase in the fatigue properties of metals
A. Prokhorov, A. N. Vshivkov, Elena Gachegova, O. Plekhov
引用数: 2 • 2022
Synergy of the Plastic Treatment HPT and Shot Peening in Aluminium Alloy Al-Mg-Mn-Sc-Zr
М. Стеглински, Paulina Byczkowska, J. Sawicki, Ł. Kaczmarek, Bartłomiej Januszewicz, Marek Klich
引用数: 2 • 2016