Screen printing

Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing

Devin J. Roach, Xiao Kuang, Chao Yuan, Kaijuan Chen, H. Jerry Qi

引用数: 203 • 2018

Direct 3D Printing of Hybrid Nanofiber-Based Nanocomposites for Highly Conductive and Shape Memory Applications

Hongqiu Wei, Xavier Cauchy, I. Navas, Yahya Abderrafai, Kambiz Chizari, Uttandaraman Sundararaj, Yanju Liu, Jinsong Leng, Daniel Therriault

引用数: 172 • 2019

Low-voltage, high-sensitivity and high-reliability bimodal sensor array with fully inkjet-printed flexible conducting electrode for low power consumption electronic skin

Kyungkwan Kim, Minhyun Jung, Bumjin Kim, Jihoon Kim, Kwanwoo Shin, Oh‐Sun Kwon, Sanghun Jeon

引用数: 138 • 2017

Screen-Printed Curvature Sensors for Soft Robots

Anastasia Koivikko, Ehsan Sadeghian Raei, Milad Mosallaei, Matti Mäntysalo, Veikko Sariola

引用数: 96 • 2017

Development of a novel carbon nanotube based printed and flexible pressure sensor

Dinesh Maddipatla, Binu B. Narakathu, Mohammed M. Ali, Amer A. Chlaihawi, Massood Z. Atashbar

引用数: 90 • 2017

Textile sensing glove with piezoelectric PVDF fibers and printed electrodes of PEDOT:PSS

Maria Åkerfeldt, Anja Lund, Pernilla Walkenström

引用数: 60 • 2015

High-Efficiency Large-Area Printed Multilayer Liquid Metal Wires for Stretchable Biomedical Sensors with Recyclability

Guangyong Li, Fankai Sun, Husheng Chen, Yuan Jin, Aibing Zhang, Jianke Du

引用数: 48 • 2021

Ultrasensitive Wearable Strain Sensors of 3D Printing Tough and Conductive Hydrogels

Jilong Wang, Yan Liu, Siheng Su, Junhua Wei, Syed Ehsanur Rahman, Fuda Ning, Gordon F. Christopher, Weilong Cong, Jingjing Qiu

引用数: 44 • 2019

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

Yiwei Shao, Qi Zhang, Yulong Zhao, Xing Pang, Mingjie Liu, Dongliang Zhang, Xiaoya Liang

引用数: 28 • 2021

Resistance Control of an Additively Manufactured Conductive Layer in Roll-to-Roll Gravure Printing Systems

Minho Jo, Jongsu Lee, Seong-Yong Kim, Gyoujin Cho, Taik‐Min Lee, Chang‐Woo Lee

引用数: 24 • 2021

4D printing of semi-crystalline crosslinked polymer networks with two-way shape-memory effect

Lorenzo Bonetti, Daniele Natali, Stefano Pandini, Massimo Messori, Maurizio Toselli, Giulia Scalet

引用数: 23 • 2024

Direct ink writing of reinforced polydimethylsiloxane elastomer composites for flexure sensors

Zeyu Ma, Xiaodong Zhang, Hongcheng Liu, Shan Lu, Liguo Qin, Guangneng Dong

引用数: 19 • 2022

Electrical conductivities and sensing mechanisms of low-temperature 3D printing conductive hydrogels with good sensitivity

Han Wu, Qian Zhao, Yanjiao Chang, Chang Liu, Yihao Hou, Mingzhuo Guo, Xinhua Zhao, Xiaogeng Wang, Hanqi Wang, Luyu Zhang, Yunhong Liang, Luquan Ren

引用数: 17 • 2023

Effect of Fumed Silica Nanoparticles on the Performance of Magnetically Active Inks and DIW Printing

Zhiqiang Xu, Xiaodong Wang, Feng Chen, Kewen Chen

引用数: 14 • 2023

Aerosol jet printed resistive temperature sensors with high sensitivity

Muhammadeziz Tursunniyaz, Anna Meredith, Joseph Andrews

引用数: 14 • 2023

3D Printed Device for Separation of Cells and Particles by Tilted Bulk Acoustic Wave Actuation

Adem Özçelik

引用数: 10 • 2022

Soft actuators with screen-printed curvature sensors

Anastasia Koivikko, Ehsan Sadeghian Raei, Veikko Sariola, Milad Mosallaei, Matti Mäntysalo

引用数: 10 • 2017

Strain gauges capable of measuring large cyclical deformations printed on elastic polymer films

А. П. Кондратов, Vladislav Yakubov, Alex A. Volinsky

引用数: 9 • 2020

Effects of Hardness on the Sensitivity and Load Capacity of 3D Printed Sensors

Myoeum Kim, Daryl George Philip, Omar Faruk Emon, Jae‐Won Choi

引用数: 9 • 2021

Development of conductive coated polyester film as RPC electrodes using screen printing

S.D. Kalmani, N. K. Mondal, B. Satyanarayana, P. Verma, V.M. Datar

引用数: 8 • 2009